Cleaning And Maintenance - Nevir NVR-9507 CR Manual

Instructions for Use
NOTE : It is normal when the heaters are turned on for the first time or
when they are turned on after having not being used for a long
period of time that they may emit some smell and fumes. This will
disappear when the heater has been on a short while.
Choose a suitable location for the heater taking into account the
safety instructions above.
After inserting the plug, turn the control to the desired setting.
There are 4 settings:
OFF
FAN ONLY (COOL BLOW FUNCTION)
LOW SETTING 1
HIGH SETTING 2
This heater is equipped with a thermostat. Turning clockwise will
increase the desired temperature (the heater will switch on more
frequently). Turning anti-clockwise will cause the heater to switch on
less frequently.
Tip: When the thermostat is turned completely anti-clockwise, the
heater will only switch on when the ambient temperature in the
room is about 5 degrees centigrade. This is sometimes handy as a
frost prevention measure in greenhouses etc.

Cleaning and Maintenance

Before cleaning, please unplug the heater first and wait for it to cool
down completely.
The appliance needs only external regular cleaning.