Formcase TransformerCart T30 Instruction Manual

Formcase TransformerCart T30 Instruction Manual

Advertisement

⑤ Plug the power cord into an indoor socket.
⑥ Turn the main switch of the charging cart on.
Switch

CHARGING MODE SWITCHING

Charging cart with three charging modes:
①.Timer charging: the customer can set multiple sets of charging times
according to their needs, see timer manual for detailed operation.
②.Delayed power on: factory default state, when the main switch is opened,
there will be a 1 second interval between power on at each level to prevent
transient currents from being too high and causing tripping.
③.Cycle charging: When the total power is too high, the circuit breaker
will trip, in which case you need to switch the charging cart to cycle
charging by following the written instructions on the charging cart to
switch the mode switch.
AFTER SALES SERVICE
The following conditions are not covered by the after-sales service:
① Damage caused by improper use, maintenance or storage;
② Damage caused by self-modification;
③ Damaged after purchase due to dropping and during installation;
④ Damage caused by force majeure factors such as earthquakes, fire,
lightning strikes, abnormal voltages and secondary disasters.
Mode switch
4
INSTRUCTION MANUAL
INSTRUCTION MANUAL
CAUTIONS
MODEL
T30

LIST OF ACCESSORIES

Power cord*1
Keys*2
Instruction manual*1
Velcro*30
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TransformerCart T30 and is the answer not in the manual?

Questions and answers

Summary of Contents for Formcase TransformerCart T30

  • Page 1 ⑤ Plug the power cord into an indoor socket. INSTRUCTION MANUAL INSTRUCTION MANUAL ⑥ Turn the main switch of the charging cart on. MODEL Switch LIST OF ACCESSORIES CHARGING MODE SWITCHING Power cord*1 Charging cart with three charging modes: Keys*2 ①.Timer charging: the customer can set multiple sets of charging times according to their needs, see timer manual for detailed operation.
  • Page 2 OPERATION STEPS PRODUCT DESCRIPTION ① Before operation, turn off the power switch to ensure that the device is not powered on. ② Open the rear door, insert the computer adaptor plugs one by one into the sockets and place the adaptors in the corresponding storage slots. ③...

Table of Contents