Inhalt Seite Einleitung Bestimmungsgemäße Verwendung Haftungsausschluss Verwendungszweck Sicherheitshinweise Inbetriebnahme Anforderungen an den Aufstellort Aufbau der Carving Station Einsetzen und Wechseln der Glühbirne Vor dem ersten Gebrauch Bedienung Funktionsweise Gebrauch Reinigung Lieferumfang Wartung/Instandhaltung Reparaturen Lagerung Entsorgung Technische Daten...
Einleitung Vielen Dank, dass Sie sich für ein Produkt aus dem Hause SPRING entschieden haben. Dieses Gerät entspricht den höchsten Sicherheitsanforderungen. Dennoch wird, wie bei jedem elektrisch betriebenen Gerät, auch beim Betrieb der Carving Station/Wärmelampe besondere Sorgfalt verlangt. Aus diesem Grund bitten wir Sie, die Gebrauchsanweisung sorgfältig zu lesen und zu beachten. Diese enthält die erforderlichen Informationen zur sicheren Benutzung.
Page 6
Berühren Sie diese nicht während des Betriebs. Auch nach dem Ausschalten besteht Restwärme. Verwenden Sie bei Bedarf unsere SPRING GRIPS Topflappen und Handschuhe. - Transportieren Sie das Gerät nicht, solange es noch heiß ist. Ziehen Sie nicht am Kabel, um es zu verschieben, sondern heben das Gerät an und stellen es dann an den gewünschten Platz.
Inbetriebnahme Gefahr! Beachten Sie die unter Kapitel 4.1 beschriebenen Hinweise zu den Anforderungen an den Aufstellort. Vorsicht! Lassen Sie Kinder nicht unbeaufsichtigt in der Nähe des Gerätes. Verletzungs- bzw. Verbrennungsgefahr! Beim Betrieb des Geräts entstehen hohe Temperaturen. Anforderungen an den Aufstellort - Betreiben Sie das Gerät nur auf nicht brennbaren, ebenen und stabilen Oberflächen und nicht in der Nähe von heißen Herdplatten, Gasflammen oder anderen Wärmequellen sowie außer Reichweite von Kindern.
Vor dem ersten Gebrauch - Lesen Sie zuerst die Gebrauchsanweisung und die Sicherheitshinweise sorgfältig durch. - Entfernen Sie sämtliche Verpackungsmaterialien und vergewissern Sie sich, dass alle Teile gemäß Kapitel 7 Lieferumfang enthalten sind und sich diese in ordnungsgemäßem Zustand befinden. - Wischen Sie die Carving Station/Wärmelampe nur mit einem weichen Tuch, ggf.
Reinigungsmittel. - Stellen Sie sicher, dass das Gerät vollständig trocken ist, bevor Sie es erneut benutzen. Lieferumfang Im Lieferumfang enthalten, je nach Modell, sind: Carving Station DUO Carving Station SINGLE Wärmelampe DUO Wärmelampe SINGLE 1 x Heizlampenhalterung 1 x Heizlampenhalterung 1 x Heizlampenhalterung 1 x Heizlampenhalterung...
Bauteile enthalten. Beachten Sie dabei die nationalen Bestimmungen. Stellen Sie bei der Entsorgung sicher, dass das Gerät nicht von dritten Personen wieder in Betrieb genommen werden kann. Technische Daten Beschreibung Carving Station DUO Carving Station SINGLE Wärmelampe DUO Wärmelampe SINGLE Artikelnummer 49 3000 64 46...
Page 11
PROFESSIONAL GASTRONOMY QUALITY CARVING STATION HEATING LAMP SINGLE & DUO RONDO OPERATING INSTRUCTIONS...
Page 12
Wire key 1. blue 2. brown 3. yellow Wiring diagram Carving Station SINGLE Carving Station DUO 49 3000 45 44 49 3000 64 46 220-240 V | 50/60 Hz | 300 W 220-240 V | 50/60 Hz | 550W On/Off...
Page 13
Assembling the Carving Station (49 3000 45 44 & 49 3000 64 46) Stone plate Heating lamp holder M5 screw Cable cover M5 nut...
Page 14
Contents Page Introduction Proper use Liability exclusion Intended use Safety instructions Starting up Requirements for the installation site Setting up the Carving Station Inserting and changing the bulb Before the first use Operation Function Cleaning Scope of delivery Servicing/Maintenance Repairs Storage Disposal Technical specifications...
Introduction Thank you for having chosen a product made by SPRING. This appliance complies with the highest safety standards. Nevertheless, as all electric appliances, the Carving Station/Heating lamp must be operated with care. For this reason, we ask you to read and follow the instructions carefully. They contain the information required for a safe use.
Page 16
Risk of burns or injury! Using the appliance results in high temperatures at the stone plate and the heating lamp. Do not touch these while in operation. Even after use, there is residual heat. Use our SPRING GRIPS pot holders or gloves, if necessary.
Starting up Danger! Observe the instructions for Requirements for the installation site described in Chapter 4.1. Caution! Do not leave children unattended in the vicinity of the device. Risk of burns or injury! High temperatures are generated during operation of the appliance. Requirements for the installation site - Only place the appliance on non-flammable, flat and stable surfaces and not near hot cook tops, gas flames or other sources of heat and out of the reach of children.
Operation Caution! Do not leave children unattended in the vicinity of the device. Risk of burns or injury! High temperatures are generated during operation of the appliance. Function Carving Station (49 3000 45 44 & 49 3000 64 46) A heating element is placed underneath the stone plate, which heats up the stone plate. The heating lamps keep the meals warm from the top.
- For cleaning, do not use any sharp objects and abrasive or aggressive cleaning agents. - Make sure that the appliance is completely dry before using the appliance again. Scope of delivery Included in scope of delivery, depending on model, are: Carving Station DUO Carving Station SINGLE Heating lamp DUO Heating lamp SINGLE...
Follow the regulations in your country. When disposing of it, ensure that the appliance cannot be operated again by third parties. Technical specifications Description Carving Station DUO Carving Station SINGLE Heating lamp DUO Heating lamp SINGLE Item no. 49 3000 64 46 49 3000 45 44...
Need help?
Do you have a question about the Carving Station DUO and is the answer not in the manual?
Questions and answers