Advertisement
ANT
SELECT
This switch selects the antenna to be matched.
The operator
has the choice of one of three coax-fed antennas or a single wire
antenna.
POWER
&SWR
switch
This switch is used to select the proper sensitivity of the FWD POWER
raeter for the power being used, and to provide calibration for the
measurement
of SWR,
FWD POWER meter
The FWD POWER meter reads the output power on three scales of
25 watts, 250 watts, and 500 watts maximum.
SWR meter
When calibrated, this meter provides accurate measurement of SWR
for purposes of adjusting the LOAD and TUNE controls for the best
match,
CM COUPLER UNIT
2500)
(500)
Advertisement
