Operation; Probe Installation - Xetron STC-1000Pro User Manual

2.0 Operation

Incorrect operation may cause serious damage to you or your device.
Please make sure you read and understand the following procedures before starting.

2.1 Probe Installation

Plug the temperature probe fully to the bottom of the main controller's headphone jack.
Otherwise, a buzzer alarm will be triggered, and the "Err" code will show on the LCD after
powering the controller.
2.2 Power On
Plug the controller into a 100V to 250V power outlet, the LCD will light up and display
temperature and other parameters.
Fully Plug In
3