Savio AK-67 User Manual

External m.2 ssd nvme enclosure

Advertisement

ENGLISH
Thank you for choosing Savio product!
If our product meets your expectations, share your opinion with other
people on the portal ceneo.pl, social media or on the website of the
store where you made the purchase. If you want to show our device on
SAVIO Facebook Page, we will be very pleased.
If there is something that we could improve on our products, please write
to us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the product to your
expectations.
Before starting the use of purchased device it is recommended to read the
whole manual.

1. Package content:

• SAVIO AK-67 External M.2 SSD NVMe Enclosure
• USB 3.1 to USB-C cable
• Mounting kit
• User manual

2. Device installation:

2.1 Open the SAVIO AK-67.
2.2 Install the drive inside the enclosure by plugging it into the
connector on the motherboard. Be sure to attach it to the
PCB with the included mounting kit.
2.3 After assembling the enclosure, connect one side of the sup-
plied cable to the USB-C connector on the SAVIO AK-67, and
the other side to a free USB-A port on your computer:
2.4 The computer will detect the drive and install the appropriate
drivers automatically.
2.5 The device is ready to use.

3. Technical specification:

• Interface: USB 3.0
• Maximum bandwidth: 10 Gbps
• Maximum capacity of the installed disk: 4 TB
• Connector: USB 3.1 Gen 2
• Dimensions: 104.5 × 39.5 × 12 mm
• Weight: 44 g
• Colour: grey
• Supported drives: M.2 2230, M.2 2242, M.2 2260, M.2 2280
• Compatible with: Windows XP / Vista / 7 / 8 / 10 / 11, MacOS, Linux

4. Safety conditions:

• Use the product in accordance with its intended use, as improper
use may damage the product.
• Do not expose the device to moisture, heat or sunlight, do not
use the product in a dusty environment.
• The device should be cleaned only with a dry cloth.
• Independent repairs and modification result automatic loss of
the warranty.
• Hitting or dropping may damage the product.
External M.2 SSD NVMe enclosure
User manual
model: AK-67
POLSKI
Dziękujemy za zakup produktu marki Savio!
Jeśli nasz produkt spełnił Twoje oczekiwania, podziel się swoją opinią z in-
nymi osobami na portalu ceneo.pl, w mediach społecznościowych lub
na stronie sklepu, w którym dokonałeś zakupu. Będzie nam niezmiernie
miło, jeśli zechcesz również pochwalić się naszym urządzeniem na profilu
SAVIO na Facebooku.
Jeśli jest coś, co moglibyśmy poprawić w naszych produktach, napisz
nam o tym na adres: support@savio.net.pl
Dzięki Twojej opinii będziemy mogli jeszcze lepiej dopasować produkt
do Twoich oczekiwań.
Przed przystąpieniem do korzystania z zakupionego urządzenia zaleca się
przeczytanie całej instrukcji obsługi.
1. Zawartość zestawu:
• SAVIO AK-67 Obudowa na dysk zewnętrzny M.2 SSD NVMe
• Kabel USB-A – USB C 3.1
• Zestaw montażowy
• Instrukcja obsługi
2. Instalacja urządzenia:
2.1 Otwórz obudowę SAVIO AK-67.
2.2 Zainstaluj dysk wewnątrz obudowy wpinając go do złącza
na płycie głównej. Pamiętaj o przymocowaniu go do PCB za
pomocą dołączonego zestawu montażowego.
2.3 Po złożeniu obudowy w całość, podłącz jedną stronę do-
starczonego kabla do złącza USB-C w SAVIO AK-67, a drugą
stronę do wolnego portu USB-A w komputerze.
2.4 Komputer wykryje dysk i zainstaluje odpowiednie sterowniki
automatycznie.
2.5 Urządzenie jest gotowe do pracy.
3. Specyfikacja techniczna:
• Interfejs: USB 3.0
• Maksymalna przepustowość: 10 Gbps
• Maksymalna pojemność zainstalowanego dysku: 4 TB
• Złącze: USB 3.1 Gen 2
• Wymiary: 104.5 × 39.5 × 12 mm
• Waga: 44 g
• Kolor: szary
• Obsługiwane dyski: M.2 2230, M.2 2242, M.2 2260, M.2 2280
• Kompatybilność z systemami: Windows XP / Vista / 7 / 8 / 10 / 11,
MacOS, Linux
4. Warunki bezpieczeństwa:
• Należy używać produktu zgodnie z jego przeznaczeniem, gdyż
niewłaściwe użytkowanie może spowodować uszkodzenie
produktu.
• Nie należy narażać urządzenia na działanie wilgoci, gorąca,
promieni słonecznych ani używać produktu w zakurzonym
otoczeniu.
• Urządzenie należy czyścić wyłącznie suchą szmatką.
• Dokonywanie samodzielnych napraw i modyfikacji urządzenia
skutkuje utratą gwarancji, a także może spowodować uszko-
dzenie produktu.
• Uderzenie lub upuszczenie produktu może spowodować jego
uszkodzenie.
1
Obudowa na dysk zewnętrzny M.2 SSD NVMe
Instrukcja obsługi
model: AK-67

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AK-67 and is the answer not in the manual?

Questions and answers

Summary of Contents for Savio AK-67

  • Page 1 2.3 After assembling the enclosure, connect one side of the sup- 2.3 Po złożeniu obudowy w całość, podłącz jedną stronę do- plied cable to the USB-C connector on the SAVIO AK-67, and starczonego kabla do złącza USB-C w SAVIO AK-67, a drugą...
  • Page 2 Your personal data Pełny tekst deklaracji zgodności UE jest dostępny pod następu- will not be subjected to automated decision making, including jącym adresem internetowym: www.savio.net.pl/do-pobrania profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.

Table of Contents