Driver Pre-Installation - HART MicroLink 101-0027C Installation Operation & Specifications Manual

Driver Pre-Installation

The USB drivers should be installed before the MicroLink HART modem is
connected to the PC's USB port. A er the drivers are installed, Windows will
automa cally detect the modem when it is connected to the USB port and
complete the setup.
Important!
Install USB driver before
connec ng to the USB port.
Msetup.exe HART Protocol Setup Utility
Click the Install bu on in the 101-0027 window to pre-install the USB drivers.
The driver installer will guide you through the setup process.
Installers can also be run manually from the CD, without running Msetup, by
\
running fi le for 32 bit opera ng systems or
x86\dpinst.exe
bit opera ng systems.
Don't have a CD drive?
Download the HART Protocol CD image from
Running the fi le will self-extract the compressed fi les and
start the Msetup.exe HART Protocol Setup U lity.
2
To pre-install the drivers, run Msetup.exe
from the included CD. The CD will auto-run
this fi le if the Windows autorun feature is
enabled for your CD drive.
www.microfl x.com/pages/support
for 64
x\64\dpinst.exe