Related Manuals for HSC Elite BH25V2
Summary of Contents for HSC Elite BH25V2
- Page 1 ELITE INDUSTRIAL SPACE HEATER BH25V2 OPERATING INSTRUCTIONS PLEASE READ BEFORE USE Control Document No: 00002UIRS0619V3...
- Page 2 Operating Instructions. Thank you for purchasing an Elite product, manufactured to a high standard, this product will, if used in accordance to these operating instructions, labels affixed to the product and properly maintained, provide you with many years of reliable service. Propane gas cylinders are not supplied with the unit.
- Page 3 SAFETY. ENSURE gas cylinders are stored in accordance with relevant regulations. ENSURE only propane gas is used. ENSURE the heater and gas cylinder is located on a flat level surface. ENSURE the gas cylinder is used in the correct orientation with the valve at the top. Secure cylinder in position to prevent damage and movement.
- Page 4 DO NOT operate the heater without any guarding supplied, or missing components. DO NOT operate the heater within 3 metres of the cylinder DO NOT leave the heater unattended whilst in use. DO NOT use the heater within a potentially explosive environment DO NOT use duct work to direct heat.
- Page 5 3. Positioning Fully unwind the gas hose from the heater before use. Position the heater so that it cannot overheat the gas cylinder (3m minimum distance), care should be taken to ensure any other combustible surfaces/walls is at least 1000 mm minimum distance from the heater. To avoid overheating the floor, use only on a non-combustible surface.
- Page 6 4.2. Lighting the heater Note: - When lighting the heater for the first time from new, do so in a well-ventilated area or open space to allow any fumes from the protective finish to disperse. Turn the Control Knob clockwise fully to the end to ensure the valve is in the closed position. •...
- Page 7 4.3. Turning off the heater Close the propane supply cylinder valve until the flame extinguishes. • • Turn the control knob clockwise to the end (closed position). If you are in any doubt about the use of the space heater, turn off the gas at the cylinder valve and consult your dealer or manufacturer.
- Page 8 Maintenance and servicing 7. Routine maintenance The following routine maintenance checks should be carried out at the beginning of each heating season or if the heater has not been used for a period of more than 12 months. 7.1. Cleaning: Ensure the heater is fully cooled before any maintenance. Wipe exposed metal surfaces with a clean damp cloth 7.2.
- Page 9 8.2. Spark electrode: To replace the spark electrode. 1. Remove the HT lead from the spark electrode connector. 2. Unscrew and remove the spark electrode from the burner. 3. Check and remove any obstructions from the ignition well in the burner. 4.
- Page 10 Telephone: 0115 9461988 Email: sales@hscgroupuk.co.uk The Hire Supply Company (UK) Ltd, 7-10 Eldon Road Trading Estate, Attenborough, Nottingham, NG9 6DZ, UK HSC Industrial & Commercial Equipment (EU) Ltd. First Floor, Penrose 1, Penrose Dock, CORK, T23 KW81. IRELAND. Control Document No: 00002UIRS0619V3...
Need help?
Do you have a question about the Elite BH25V2 and is the answer not in the manual?
Questions and answers