Creative Desktop Wireless 9000 Pro User Manual page 20

Step 5:
Activating
Your Creative
Desktop
Wireless 9000
Pro
1. Press the RESET button on the RF receiver, then press the RESET button on
your mouse.
2. Press the RESET button on the RF receiver again, then press the Connect
button on your keyboard.
3. Test your mouse and keyboard. If they do not respond, do one or more of the
following, and then repeat steps 1, 2 and 3 again.
• Make sure that the RF receiver is connected correctly to your computer.
• Make sure that the batteries are not discharged.
• Make sure that the batteries have been inserted properly and according to
the directions shown in the battery compartment.
1
Figure 3-4: Activating the Creative keyboard and mouse
2
Installing Creative Desktop Wireless 9000 Pro 3-5
3