Advertisement
Quick Links
Instruction Sheet
Models TH2642E and CH2642E
Models TH2642E and CH2642E
4 - 4˝ casters, 2 w/brake
4 - bolts
4 - nuts
1 - cord wrap with bracket
1
Back
Front
Turn bottom stand assembly upside down on a smooth
surface. Push the four casters firmly into the caster
socket holes in bottom of each leg as illustrated.
IMPORTANT: Casters must be fully seated. Tap with
rubber mallet firmly to properly seat casters. Turn the
stand right side up.
A Division of ACCO Brands, Corp.
300 Tower Parkway
Lincolnshire, IL 60069
(800)777-3750
1 - power cord assembly
4 - screws
1 - rubbermat
Place Locking Casters
as illustrated
Parts List
Tools Required:
1 - slotted screwdriver
1 - rubber mallet
1 - phillips screwdriver
(for cabinet models)
2
Top
Stand
Assembly
Bottom
Stand
Assembly
Position top stand assembly over bottom stand assembly, as
illustrated.
NOTE: Be sure cabling hole in corner of top and middle
shelves line up on top of each other.
Adjust top stand assembly up or down to desired height. Align
holes in all four legs, insert bolts and fasten with four kep nuts,
as illustrated.
TH2642E
CH2642E
For Cabinet Models Only:
2 - keys
1 - chrome handle
2 - phillips head screws
Cabling Holes
KepNut
Bolt
9/00
Advertisement
Summary of Contents for Apollo TH2642E
- Page 1 Instruction Sheet Models TH2642E and CH2642E A Division of ACCO Brands, Corp. 300 Tower Parkway Lincolnshire, IL 60069 (800)777-3750 TH2642E CH2642E Parts List Models TH2642E and CH2642E Tools Required: For Cabinet Models Only: 4 - 4˝ casters, 2 w/brake 1 - power cord assembly...
- Page 2 Cord Wrap Bracket Cabling Hole Position cord wrap bracket over mounting holes in end of table and secure with two small screws and nuts. SEE DRAWING A. CABINET MODELS ONLY Plug snap Recessed Handle For models with a cabinet. Press 3-outlet power cord into “U” bracket mounted on table and wrap remaining cord around cord bracket.