Kenwood KR-V7060 Instruction Manual page 22

7 Activate the DOLBY PRO LOGIC mode.
@
(SURROUND) RROUNDI
Each press of the CENTER MODE key switches the center modes as
follows: ,
(NORMAL :When the center speaker is a compact-sized
speaker.
@WIDEBAND :When the center speaker is a medium- or large-
sized speaker.
@PHANTOM = :When the center speaker is not used.
e If you cannot tell whether your center speaker is compact or me-
dium-sized, try two modes and select according to your liking,
® The selected center mode is automatically stored in memory and
held unless it is changed later.
@ Select the center mode using a &
sharp object (such as a ball-point §&
DUCT Ee eee ee ee ee Te ETT eee ER
® The test tone which is heard like noise moves between speakers at
2 Adjust the volume balance. : anintervalof1.5sec. =
@ Generate the test tone. : In NORMAL and In PHANTOM mode:
1s 3 , : WIDE BAND modes:
Left (L) Left (L)
Center (C) a Right (R}
t Right (R} Surround (Rear) {S)
e i - Surround (Rear) {S)
@ Align the speaker volumes with the
main speaker volume.
Center speaker To increase SPEAKERS =
MULTI LEVEL CONTRO' aon ie [" im } !
ca > vv & a iy See L
,
b
=
Rear speakers - :
To: decrease e Be sure to adjust fram your listening position.
ri é e When a key is pressed, the corresponding volume level to the key is
@ Stop the test tone. displayed on the display. While the level is displayed, it can be ad-
, TEST ; justed by 1 dB per press of the key.
@ The volume levels can be adjusted in the range from ~10 dB to +10
dB.
® The center and rear levels. are stored in memory as the common
settings with the THEATER LOGIC made.
eer eee Se ee
@ When the DELAY TIME key is pressed, the delay time is displayed
on the display.
@ The delay time can be adjusted in the range from 15 to 30 ms, in &
ms steps.
e Set the closest value to the value obtained with method @ or @
below.
e@ Once the delay time has been preset, it is held until it ts re-set later.
: ' ' , (Use the delay time calculation chart on the below.
Assuming that the distance from the front speaker is A § Example: When A = 3m, B = 3m,the delay time is 20 ms.
meters and the distance from the rear speakers is B meters |
@ Use the follow- ;
ing formula for
calculation.
Delay time
= 20+ 3x (A - B) (Unit: ms}