Table of Contents
Advertisement
PL-55X
4.11
ADJUSTMENT
OF MOTOR
SPEED
When adjustment
of the fine speed control does
not give a satisfactory speed, adjust the motor in
accordance with the following procedure.
Use screwdriver
1. Remove the bottom cover.
aaa
li
2. Set the fine speed control to the midposition.
3. While observing the edge of the turntable platter
with a strobo, adjust screws inside the motor as
shown in Fig. 15.
4. Alternate switching between 33-1/3 and 45 rpm
speeds while making adjustment. Make sure that
- both speeds are correct.
First set knob to
midposition
Fig. 15
114
Advertisement
Table of Contents
