Advertisement
Quick Links
ACCESSORY SETUP INSTRUCTION
REAR SEAT, RACE LOOK_NEBULA WHITE, NEBULA BLACK
REAR SEAT, RACE LOOK_ZIRCON BLACK, VELOCITY GREY
PN 6AQV-801300-1000，6AQV-801400-1000
VALID FOR: CF 450SS
BEFORE YOU BEGIN: Read and understand the instructions before starting any work. Make sure that all parts are
ready and that you have all the tools required for assembly.
NOTE: CFMOTO shall not be liable for any damage caused by incorrect assembly. CFMOTO recommends that all
original accessories be assembled by an authorized CFMOTO dealer.
Before assembly, park the vehicle on a flat surface, put the transmission gear into Park (P) and turn off the key
switch.
Zhejiang CFMOTO Power Co., Ltd.
permitted only with the express written permission of the copyright owner.
MEANING OF SYMBOLS
- Indicates information with more details or tips.
- Indicates information of warning or danger.
!
PART LIST:
ITEM
PART NAME
REAR SEAT, RACE LOOK_NEBULA WHITE,
1
NEBULA BLACK
2
LOCK PLATE
TOOL LIST:
All rights reserved. Reproduction of this document, even in part, as well as copying of all kinds, is
2
ITEM
PART NAME
1
PHILLIPS SCREWDIVER
2
M5 INNER HEX WRENCH
3
PROTECTIVE GLOVES
PART NUMBER
6AQV-801300-1000
6AQV-801101-1000
REMARK
Recommended Tools
QTY.
DISCRIPTION
1
For structure reference
only.
1
1
1
Advertisement
Summary of Contents for CF MOTO 6AQV-801300-1000
- Page 1 ACCESSORY SETUP INSTRUCTION REAR SEAT, RACE LOOK_NEBULA WHITE, NEBULA BLACK REAR SEAT, RACE LOOK_ZIRCON BLACK, VELOCITY GREY PN 6AQV-801300-1000，6AQV-801400-1000 VALID FOR: CF 450SS BEFORE YOU BEGIN: Read and understand the instructions before starting any work. Make sure that all parts are ready and that you have all the tools required for assembly.
- Page 2 ASSEMBLY and INSTALLATION - Remove the front seat screws (A) and front seat. - Insert the vehicle key into the seat lock and rotate the key to remove the rear seat of the vehicle. - Remove the self-tapping screw (B) and fixing screw (C), (D).
- Page 3 ASSEMBLY and INSTALLATION - Assemble the connecting plate of the race rear seat and tighten the self-tapping screws (B). - Remove the fixing screws (E), install the fixing plate (2), and tighten with the fixing screws (E). - Install the race rear seat into the vehicle and tighten with the self-tapping screws (B) and screws (D).