Sony TC-204SD Service Manual page 5

_TC-2045D _
PAUSE Timing Adjustment
— Stop Mode —
shown below.
pinch roller (lo 0)
;
Adjust by bending here.
motor switch (S603)
adjustment
screw
brake release plate
Muting Switch (S602) Position Adjustment
— Stop Mode —
1. Loosen the adjustment screw and adjust the switch
position so that the gap of the switch contacts
becomes 1.0 + 0.5 mm.
1.040.5mm muting switch (S602)
contact
record lock plate
Timing Switch (S601) Position Adjustment
— Stop Mode —
1. Loosen the adjustment screws and adjust the posi-
tion of the timing switch circuit board so that the
muting lever just contacts the switch hole and the
switch starts to move.
2. After the adjustment, secure the screws with a
locking compound.
timing switch
(S607)
adjustment screw
adjustment
screw