Sony MXP-290 Operation And Maintenance Manual page 47

1-2-2. Output Section
Control panel
ooo! 6: O°
N
a
N
©: 0)
OZAIE oO
ro) 0)
co
a.
[DOs oe teers a Ol ee oeele
@ VU meters
Used to indicate the output levels of the L and R
channels respectively. The EXT MONITOR button @
and MONITOR SELECT switch @ are used to select the
signal, the level of which is indicated on the meter.
@ MASTER L and R faders
Used to adjust the signal levels of the L and R channels
respectively. The MASTER L fader adjusts the level of
the signals output from the LINE OUT 1 @ and LINE 1
@ connectors; the MASTER R fader adjusts the level of
the signals output from the LINE OUT 2 and LINE 2
connectors. A thick line at "7" on the level indication
indicates the reference level. The gain margin from the
reference level to the level of the maximum setting is
10 dB.
1-6(E)
6:0 &0.
IW
SS
4) VU meters
OY
SS
\
W
\N
\
S
00
@® AUX OUT (auxiliary output) 1 and 2 faders
Used to adjust the levels of the signals output from the
AUX OUT 1 and AUX OUT 2 connectors @ respectively.
A thick line at "7" on the level indication indicates the
reference level. The gain margin from the reference
level to the level of the maximum setting is 10 dB.