Advertisement
7 Basic recording
Let's Record
ө The VOLUME,
BALANCE,
LOUDNESS, and
BASS and TREBLE tone controls can be adjust-
ed when recording.
If the tape deck is a З head deck, (one which
has independent heads for erasing, recording,
and playback), the just-recorded signals can be
monitored by depressing the TAPE MONITOR
switch (TAPE 1 or TAPE 2 for AM-52). The play-
back sound of the input source can be adjusted
with the VOLUME control of the amplifier, but it
will have no effect on the recording volume
level. To adjust the recording volume level, use
the tape deck's REC LEVEL control.
© ©
Select the recording source with the proper
Input select buttons.
To record from ...
a compact disc — Depress the CD button
a record — Depress the PHONO button
the radio — Depress the TUNER button
an auxiliary source ~Depress
the
AUX
button
DAT tape — Depress the DAT button
Play back the source.
Prepare the tape deck or the DAT deck for
recording.
Begin recording.
For the AM-52 user
Do not depress both the TAPE 1 and TAPE 2
TAPE
MONITOR
switches at the same time
during recording.
if you want to monitor during recording when
the two decks are in the recording mode, turn
one of the TAPE
MONITOR
switches on and
turn the other one off.
Tape Dubbing
For the AM-52 user
Depress TAPE
1 of the TAPE
MONITOR
switch.
Depress TAPE
2 of the TAPE
MONITOR
switch so it is OFF, the indicator light will turn
off.
Prepare the TAPE 1 deck for playback.
Prepare the TAPE 2 deck for recording.
To make a copy of a prerecorded cassette
tape:
©
O
Begin recording.
ө Do not depress the TAPE 1 switch during tape
dubbing. If depressed, tape dubbing will not be
performed.
е Tape dubbing from the TAPE 2 deck to the
TAPE 1 deck cannot be done.
For the AM-32 user
1)
Depress the AUX button of the input select
button.
For tape dubbing, connect a cassette deck for play-
back as follows:
D
Prepare the cassette deck connected to the
AUX jacks for playback.
Р
Prepare the cassette deck connected to the
Connection
z
TAPE jacks for recording.
Connect the LINE OUT jacks of the cassette deck
to the AUX jacks of the amplifier with a connection
(3)
Begin recording
cord.
è If you want to monitor with the З head deck
during tape dubbing, depress the TAPE MONI-
TOR switch to on.
After monitored, depress the TAPE MONITOR
switch once again to turn off.
=
0000
Е
TLINE OUT
Advertisement
