Troubleshooting - Philips 150V5FG User Manual

Troubleshooting

Troubleshooting
• Safety and
Troubleshooting
• FAQs
This page deals with problems that can be corrected by the user. If the problem still persists after you have
• Common
tried these solutions, contact your nearest Philips dealer.
Problems
• Imaging
Common Problems
Problems
• Regulatory
Information
Having this problem?
• Other Related
Information
No Picture
(Power LED not lit)
No Picture
(Power LED is amber or yellow)
AUTO function not working properly
Imaging Problems
Display position is incorrect
Image vibrates on the screen
file:///D|/My%20documents/dfu/150V5/english/150v5/safety/saf_troub.htm (1 of 3) [4/14/2004 11:08:59 AM]
Check these items
Make sure the power cord is plugged into the
power outlet and into the back of the monitor.
First, ensure that the power button on the
front of the monitor is in the OFF position,
then press it to the ON position.
Make sure the computer is turned on.
Make sure the signal cable is properly
connected to your computer.
Check to see if the monitor cable has bent
pins.
The Energy Saving feature may be activated
The Auto Function is designed for use on
standard Macintosh or IBM-compatible PCs
running Microsoft Windows.
It may not work properly if using nonstandard
PC or video card.
Perform the Auto function in OSD Main
Controls.
Adjust the image position using the
Horizontal Position and/or Vertical Position in
OSD Main Controls.
Check that the signal cable is properly
connected to the graphics board or PC.