Table of Contents
Advertisement
Quick Links
EG4 ELECTRONICS | INSTALLATION GUIDE
EG4 BRIGHTMOUNT
ADJUSTABLE GROUND MOUNT SYSTEM
PARTS
1) Rack Rail
3) End Clamp
2) Mid Clamp
4) Mount Group
5) Grounding Lug Group
6) Grounding Clip
8) L Foot Group
9) Splice Connector and
7) Anchor Bolt
Bonding Jumper
M10*100
www.eg4electronics.com
1
Version 1.0.0 | Specifications subject to change without notice.
© 2023 EG4 Electronics, LLC. All rights reserved.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EG4 BRIGHTMOUNT
Summary of Contents for EG4 BRIGHTMOUNT
- Page 1 4) Mount Group 5) Grounding Lug Group 6) Grounding Clip 8) L Foot Group 9) Splice Connector and 7) Anchor Bolt Bonding Jumper M10*100 www.eg4electronics.com Version 1.0.0 | Specifications subject to change without notice. © 2023 EG4 Electronics, LLC. All rights reserved.
- Page 2 EG4 ELECTRONICS | INSTALLATION GUIDE DIMENSIONS AND LAYOUT ENGINEERING DRAWINGS www.eg4electronics.com Version 1.0.0 | Specifications subject to change without notice. © 2023 EG4 Electronics, LLC. All rights reserved.
- Page 3 EG4 ELECTRONICS | INSTALLATION GUIDE LAYOUT AND INSTALLATION OVERALL LAYOUT Torque Recommendations: www.eg4electronics.com Version 1.0.0 | Specifications subject to change without notice. © 2023 EG4 Electronics, LLC. All rights reserved.
- Page 4 The adjustable leg is used to change the angle of the array. Adjustment instructions are on the following page. www.eg4electronics.com Version 1.0.0 | Specifications subject to change without notice. © 2023 EG4 Electronics, LLC. All rights reserved.
- Page 5 80 in. lbs. (9 Nm). Note: Both set screws must be secured to lock the adjustable leg in place. www.eg4electronics.com Version 1.0.0 | Specifications subject to change without notice. © 2023 EG4 Electronics, LLC. All rights reserved.
- Page 6 L feet as shown in the illustrations to the right. Use the provided anchor bolts to secure mounting brackets to the concrete anchors. www.eg4electronics.com Version 1.0.0 | Specifications subject to change without notice. © 2023 EG4 Electronics, LLC. All rights reserved.
- Page 7 Use the splice connectors to join rail sections together, leaving a 0.1 – 0.2 in. (3 – 5 mm) expansion gap between rail joints. Completed rail assembly. www.eg4electronics.com Version 1.0.0 | Specifications subject to change without notice. © 2023 EG4 Electronics, LLC. All rights reserved.
- Page 8 Install grounding lugs on the end of the rails to attach a grounding wire for proper array protection. www.eg4electronics.com Version 1.0.0 | Specifications subject to change without notice. © 2023 EG4 Electronics, LLC. All rights reserved.
Need help?
Do you have a question about the BRIGHTMOUNT and is the answer not in the manual?
Questions and answers