Canon PRIMA SUPER 155 Instructions Manual page 12

Close the back cover.
^The film will automatically
advance to the first frame
on the roll.
"1" is displayed on the
frame counter.
• If the frame counter shows
a blinking "O', the film did
not load correctly. Load the
film again.
* Use only film with DX-code. The camera will
automatically detect and set the film speed.
* A film speed of ISO 400 Is recommended.
* The film speed Is set to ISO 25 when non-^DX film is
lo^ed. If the film does not have a DX-code, insert it into
the film compartment, close the back cover and press
the shutter button once or twice.
* For slide (reversal) film, you can use DX-coded film
speeds of ISO 26, 50.100, 200, 400. 800,1600 and
3200.
12