Sankyo SOUND XL-60S Instruction Manual page 20

8
Orange
If the sound level indicator remains on or background noise is
excessive, set the recording sensitivity selector to "LOW" .
Plug the headset provided into the "MaN" jack, and you can
monitor the sound being recorded.
Now you are ready to film while recording sound. Press the
shutter trigger fully, and filming and recording will start at the
same time . In the viewfinder you will see the green and orange
lamps flickering.
16
Recording from other external sources
@@
o
O~
(Lowim-
pedance cord)
••
••
D
c::::::::JD
• Connect a sound source such as a TV, radio, tuner, tape deck,
record player, etc. to the "AUX" jack.
Both the microphone sound and sound from an external source
connected to the "AUX" jack can be recorded simultaneously.
With some connection cords, particularly high impedance
cords, the camera may fail to record with an external source
connected to the "AUX" jack. In such a case, connect the
connection cord to the "MIC" jack or use a low impedance
cord. Be sure to adjust the recording level using the source
device's recording output volume control while monitoring
with the headset.