ETT McShine 1453013 Instruction Manual

LED under-cabinet light McShine, PIR sensor, warm white, 4xAAA batteries.
Dear customer
congratulations on the purchase
your McShine LED under-cabinet light.
With this choice you have chosen a product
product, which combines appealing design and
design and technical features.
Please read the following connection and
carefully and follow these instructions
and follow them, in order to get the longest and safest
from your product for as long as possible.
Please read the operating instructions carefully before
carefully before using the device.
We wish you much pleasure with your
new product!

Features

This LED under-cabinet light is robust and elegant at the same time!
Due to the practical battery operation, this light provides powerful light
even without a mains connection. The built-in PIR motion sensor allows
it to turn on and off automatically. The light is therefore perfect for
e.g. caravan or entrance light.

Safety instructions

Keep the operating instructions of the device
•
• Check the device regularly for damage
Do not modify the product or accessories
•
• The product is not suitable for outdoor use.
Do not short-circuit the connections and the circuits
•
• Do not use the product unless it is in perfect condition.
perfect condition. Do not operate a defective
•
• Check the device for damage before putting it into operation.
If this is the case, please do not put the device into operation!
• Keep the device away from moisture and humidity.
Avoid extreme loads such as extreme heat or cold, wetness, microwaves, mechanical pressure and vibrations.
•
• In case of questions, defects, mechanical damage, and other problems, please contact the dealer or manufacturer.
Repair and maintenance work on the device may only be carried out by trained personnel!
•
• The product is not a toy and does not belong in children's hands!
Do not leave the packaging material carelessly lying around, plastic foils / bags, styrofoam parts, etc.,
•
• could become a dangerous toy for children.
This product contains a button cell battery. If the button cell battery is swallowed, it can cause severe internal burns
•
and death in as little as 2 hours. Do not swallow the battery, risk of burns.
Keep new and used batteries out of the reach of children. If the battery compartment cannot be closed securely, stop
•
using the product and keep it away from children. If you think batteries may have been swallowed or lodged in any
part of your body, seek medical attention immediately.
Hergestellt von ETT Distribution GmbH, Schmalbachstraße 16, 38112 Braunschweig
Instruction manual
ett-online.de | Tel. +49 531 58 11 00 | service@ett-online.de
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung.
Stand 12/2022
Artikelnummer: 1453013

Technical details:

PIR motion sensor
•
• PIR sensor range: 3m
Modes: Automatic / Off
•
• Operation via 4x AAA Mignon batteries
(not included)
• Material: aluminum
dimmable
•
• With continuous operation: 4h runtime
10 SMD LEDs
•
• warm white
color temperature 3000K
•
• beam angle 120
color rendering index 80
•
• hold ON/OFF button for dimming
• easy installation via stick-on or
integrated magnet
dimensions: 188x30mm
•