Advertisement

Quick Links

Model: DTV-07C
Compact Line PC
User's Manual
M/B Ver. 2
July /15/1997.

Advertisement

Table of Contents
loading

Summary of Contents for Datavan DTV-07C

  • Page 1 Model: DTV-07C Compact Line PC User's Manual M/B Ver. 2 July /15/1997.
  • Page 2 Introductions: Congratulation on the purchase of your DTV-07C ! You are now the owner of a state-of-the-art DTV-07C - the one that offers features; speed; and performance, and the one that is unrivaled and unattended by other conventional Pentium-586-based PC.
  • Page 3 11"(W)x11"(D)x3"(H) (280x280x75mm) CASE DIMENSION: Each set packing: 13.5"x13.5"x6.75" (34x34x17cm) EXPORT PACKING: Each set NW/GW: 5kgs/ 6kgs. Two sets packing: 15.35"x15.35"x14.76" (39x39x37.5cm) SAFETY: CE, FCC MS-DOS 4.01/5.0/6.2, OS2 V2.1, SCO XENIX: V2.3.2, S/W Compatibility: SCO UNIX V3.2, NOVELL, WINDOWS 3.1/ 95/ NT OPERATION TEMPERATURE: 0 C to 55 STORAGE TEMPERATURE: -25...
  • Page 4: Chapter 2 System Configuration

    SYSTEM CONFIGURATION - GETTING FAMILIAR WITH DTV-07C The System Unit Chassis: The following information will help acquaint you with the arrangement of the DTV-07C computer. When you open the box; what you will have will be same as Figure 2-1: Figure 2-1 Export Packing Figure 2-1 shows the full packing.
  • Page 5 The Rear Panel Composition: From left to right, the rear panel of DTV-07C contains the following: Figure 2-3 Rear View of System Unit The System Internal Composition: Figure 2-4 The System Internal Composition...
  • Page 6: Jumper Location

    DTV-07C Mainboard Layout (4 * RS-232 Version) DTV- 07C Ver 2.0 Jumper Location ¡ ³¡ ´¡ ´ ¡ ³¡ ³¡ ³ ¡ ³¡ ´¡ ´ ¡ ³¡ ³¡ ³ CPU: Intel Pentium 166 MHz ¡ ¼ ¡ ¼ ¡ ¼ ¡ ¼...
  • Page 7 DTV-07C Mainboard Layout (2 * RS-232 Version) DTV- 07C Ver 2.0 - 2 * RS-232 Jumper Location ¡ ³¡ ´¡ ´ ¡ ³¡ ´¡ ´ CPU: Intel Pentium 166 MHz ¡ ¼ ¡ ¼ ¡ ¼ ¡ ¼ ¡ ¼ ¡ ¼ ¡ ¼ ¡ ¼...
  • Page 8 * Specification of DTV-07C Pentium 586 AIO Logic board “***” remarks the difference between “Data-POS (DTV-07C4S)” and “Data-MEDIA (DTV-07C 2S)” CPU: Supports full series of Intel Pentium CPU, Cyrix/IBM, AMD CPU CLOCK - Intel Pentium 75Mhz up to 200Mhz , Cyrix (IBM) 6x86 ..166+...
  • Page 9 * IRQ & I/O MAP of DTV-07C Pentium 586 AIO Logic board Logic Board I/O map Mem Map Remark (Factory (Factory (Factory Default) Default) Default) SYSTEM TIMER 040-05F KEYBOARD 060-06F PS/2 MOUSE PORT COM 1 Hardware/Soft ware selectable IRQ 3,4,5,7,9,10,11.
  • Page 10 The Connector & Jumper Pin Location: Following pages are tables of DTV-07C Jumper Setting for:  CPU TYPE  CPU VOLTAGE REGULATOR OUTPUT  CACHE RAM SIZE  CMOS  SYSTEM BIOS FLASH ROM VOLTAGE  ENHANCED SUPER I/O ...
  • Page 11 DTV-07C JUMPER SETTING CPU TYPE JP15 JP17 JP13 JP14 (BUS) Freq. CORE/B US RA TIO CPU Model Freq. 1, 2 3, 4 (BUS) Freq. Voltage RATIO Type Type 75MHz 50MHz 3.52V Open Open Open Short Short 1, 2 AMD-SSA/5-75ABR 1.5x...
  • Page 12 Enhanced Super I/O M5113 Enhanced Super I/O Controller M5113 Enabled * Disabled JP12 1, 2 2, 3 COM1, 2, 3, 4, IRQ Selector IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 COM1 JP23 1, 2 * 3, 4 5, 6 7, 8 9, 10 11, 12 COM2...
  • Page 13 On Board VGA Selector Enabled DISABLE JP58 Short Open Short Open JP40 Short Short Use VGA Bank 1 (U43, U44 256K*16 DRAM) Enabled Disabled JP36 Open Short VGA Selector use IRQ2/9 None use IRQ2/9 Use IRQ2/9 JP38 Open Short VGA Selector MCLK or XMCLK MCLK XMCLK JP39...
  • Page 14 DTV-07C RS422/485 Interface Connection Table Onboard: JP47,48 2*5 Jumper Pin RS422 Output RS485 Output DB9-Sub Male DB9-Sub Male GND 1 ¡³ ¡³ 2 CTS+ 1 GND 2 RTS+ (N.U) RTS+ (N.U) RTS+ 3 ¡³ ¡³ 4 CTS- 3 RTS- (N.U) RTS- (N.U)
  • Page 15 Watch Dog Watch Dog Selector Watch Dog Timer Selector Enabled Disabled * 1, 2 3, 4 JP16 1, 2 2, 3 Timer Timer 1, 2 4 Seconds 60 Seconds 3, 4 8 Seconds 120 Seconds 5, 6 12 Seconds 180 Seconds 7, 8 16 Seconds 240 Seconds...
  • Page 16: Removing The Cover

    This section is intended only for those users who wish to perform the adjustments themselves and void the warranty. At any time, you can add (or remove) hardware to your DTV-07C computer and modify its capabilities. The information in this chapter will instruct you on how to open the chassis.
  • Page 17: Memory Size

    The DTV-07C lets you increase the system main memory via onboard SIMM (Single in-Line Memory Modules) Sockets. The DTV-07C supports Two banks of 4/8/12/16/20/24/32...MB SIMM Modules. The DTV-07C requires SIMM: 3.3.1 Suggested to use EDO SIMM Memory Modules 3.3.2 For FP SIMM Memory Modules, it is suggested to use 60ns.
  • Page 18: Chapter 4 Bios Setup

    BIOS SETUP Setup Overview: The DTV-07C contains its own permanently programmed SETUP routing, which allows it to recognize and utilize the system's hardware, for example, one can set the system to identify hard disk and floppy disk drive capacity, the type of video being used, and the amount of memory installed.
  • Page 23 INTERFACE CONNECTION NOTE: DTV-07C built with VGA chip - Cirrus Logic GD-7548 features display output to connect either CRT or LCD Panel separately, also able to connect both CRT and LCD Panel simultaneously. You need to carefully peruse this part to realize how to get the connection properly and correctly.
  • Page 24: Panel Descriptions

    5.3 DTV-07C VGA chip - Cirrus Logic GD-7548 location “S1” Switch setting for LCD Panel Class: Location "S1" Switch Setting for Selecting the LCD Panel Class Table PANEL DESCRIPTIONS Code for Panel Panel Mark‘s LCD switch Screen Product position Format Model No.
  • Page 25 5.4 DTV-07C LCD 44pin Connector Output PIN to Cirrus Logic GD-7548 PIN interface connection Table: DTV-07C LCD 44 Pin Cirrus Logic GD-7548 Pin Pin Defines Connector Output Pin (J9) FPBL FP16 FP17 FP18 FP15 FP19 FP22 FP23 FP14 FP12 FPDE...
  • Page 26 DTV recommends the LCD Displays from the makers as listed below and the specific cables. Buyers are free to separately purchase DTV-07C from DTV and purchase LCD Displays from these LCD makers with a necessary quotation of “Applicable CABLE CODE for DTV DTV- 07C ”...
  • Page 27 The Interface Connection Table between Recommended LCD makerlist for DTV-07C and DTV-07C Compact Line system machine: 5.5.1 Maker LCD type LCD internal Maker’s LCD Cable Code resolution model number Product number TFT Color 640*480 LT104V3-101 RTC-5200 9004 The Interface Connection Table...
  • Page 28 FPVDCLK 5.5.2 Maker LCD type LCD internal Maker’s LCD Cable Code resolution model number Product number DSTN TYPE 2 640*480 LM9723 RTC-4000 DR01 Hitachi The Interface Connection Table RTC4000 Panel D-SUB (Male) GL-GD7548 25Pin (Male) 44 Pin Output Pin Defines +12V FP10 FP12...
  • Page 29 -FPBL FPVDCLK +12V FP11 FP13 FP15 35,36 FPVEE LLCLK...
  • Page 30 5.5.3 Maker LCD type LCD internal Maker’s LCD Cable Code resolution model number Product number SOTAC TFT Color 800*600 113BLM-1 ST-011A TS01 (SUN-UP) TFT Color 640*480 ST-010A TS01 The Interface Connection Table LCD Panel D-SUB (Male) GL-GD7548 Input Pin (Male) 44 Pin Output Pin Defines FP17...
  • Page 31 FP15 FP14 FP13 LLCLK FPVDCLK FPVEE FPBL FP10 FP19 FP16 FP12 +12V +12V 5.5.4...
  • Page 32 Maker LCD type LCD internal Maker’s LCD Cable Code resolution model number Product number SOTAC DSTN Color 640*480 LM-CG53- ST-020A DS01 22NTK (SUN-UP) Sanyo The Interface Connection Table LCD Panel D-SUB (Male) GL-GD7548 Input Pin (Female) 44 Pin Output Pin Defines FP16 FP17 FPVEE...
  • Page 33: Chapter 6 Warranty Policy

    FPVDCLK LLCLK FP18 FP19 FP21 FP22 FP23 FP11 FP10 +12V +12V FPVCC FP15 CHAPTER 6 WARRANTY POLICY LIMITED WARRANTY...
  • Page 34: Warranty Return Procedures

    This product is warranted. To be free of defects in material and workshop. This warranty period shall begin on the invoice date and will be in effect for a period of one year for labor and one year for parts. WARRANTY RETURN PROCEDURES The customer must call the Dealer technical support department in order to receive a return merchandise must have the following information readily available:...

Table of Contents