Gigabyte Z790 AORUS PRO X User Manual page 25

8) ARGB_V2_1/ARGB_V2_2/ARGB_V2_3 (Addressable RGB Gen2 LED Strip Headers)
The headers can be used to connect a standard 5050 addressable RGB Gen2 LED strip, with maximum
power rating of 3A (5V) and maximum number of 256 LEDs.
(marked with a triangle on the plug) of the LED strip must be connected to
Pin 1 of the addressable RGB Gen 2 LED strip header. Incorrect connection
may lead to the damage of the LED strip.
9) LED_C (RGB LED Strip Header)
This header can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power
rating of 2A (12V) and maximum length of 2m.
triangle on the plug) of the LED strip must be connected to Pin 1 (12V) of
this header. Incorrect connection may lead to the damage of the LED strip.
For how to turn on/off the lights of the LED strip, please navigate to the "Unique Features" page
of GIGABYTE's website.
• To avoid abnormal LED behavior, do not connect addressable RGB Gen1 LED strips and
addressable RGB Gen2 LED strips to the same header at the same time.
• Before installing or removing the devices, be sure to turn off the devices and your computer.
Unplug the power cord from the power outlet to prevent damage to the devices.
1
ARGB_V2_2
1
ARGB_V2_3/ARGB_V2_1
Connect your addressable RGB Gen2
LED strip to the header. The power pin
DEBUG
PORT
1
Connect your RGB LED strip to the
header. The power pin (marked with a
- 25 -
Pin No. Definition
1 V (5V)
2 Data
3 No Pin
4 GND
Addressable RGB
Gen2 LED Strip
1
Pin No. Definition
1 12V
2 G
3 R
4 B
RGB LED Strip
1
12V