Safety; Installation - Husqvarna Fleet Services Operator's Manual

Machine sensor
Table of Contents

Advertisement

The product agrees with applicable RCM
directives. Applies to AU/NZ only.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
Safety instructions for operation
WARNING:
instructions that follow before you use the
product.
Follow the instructions about how to operate the
Operation on page 6 .
product. Refer to
Use the product with the compatible Husqvarna
products. Speak to your Husqvarna representative
for more information.
Do not make modifications on the product.
Do not use the product in dangerous environments
or near flammable material.
Do not use the product if it is damaged. If the
product is damaged, it can become too hot and
increase the risk of fire.
To prepare for the installation of the
Husqvarna Fleet Services
Sensor
1. Install the battery. Refer to
page 7 .
2. Download the Husqvarna Fleet Services
the Husqvarna Fleet Gateway app on your mobile
device.
3. Log on to the app.
4
Used if there is a risk of
Used if there is a risk of
Read the warning

Installation

Machine
To replace the battery on
app or

Safety

Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
Water leakage can cause electrical shock or fire.
Make sure that you do maintenance on the product
in a dry area.
Follow the instructions about how to do maintenance
on the product. Refer to
Battery safety
WARNING:
instructions that follow before you use the
product.
Only use original batteries that Husqvarna
recommends for your product. Refer to
data on page 10 .
Keep the battery away from children.
Keep the battery away from sunlight, heat or open
flame. The battery can cause an explosion and
cause burns and/or chemical burns.
Keep the battery away from rain and wet conditions.
Do not try to disassemble or break the battery.
Do not do modifications to the battery.
Do not use a damaged battery.
Do not keep the battery in ambient temperatures that
are more than 65°C/149°F.
Do not use the product if the battery compartment
does not close tightly.
4. Do a pairing operation. Refer to
operation with a product on page 4 .
To do a pairing operation with a
product
1. Make sure that your mobile device has Wi-Fi
connection and that Bluetooth
is enabled on your mobile device.
2. Open the Husqvarna Fleet Services
Husqvarna Fleet Gateway app on your mobile
device.
Read the warning
Maintenance on page 7 .
Read the warning
Technical
To do a pairing
®
wireless technology
app or the
2132 - 001 - 19.10.2023

Advertisement

Table of Contents
loading

Table of Contents