Connecting To The Water Supply; Using Detergent /Softener And Bleach Nector; Put Rat Guard Into The Machine - Beko WTL 10019 P User Manual

Installation

3.7 Connecting to the water supply

Important:
• The water supply pressure required to run the
machine must be 1-10 bar (0,1 – 1 MPa).
• Connect the special hoses supplied with the
machine to the water intake valves on the
machine.
• Applies for the products supplied with a blind
stopper group.
• Models with a single water inlet should not be
connected to the hot water tap.
• When returning the appliance to its place after
maintenance or cleaning, care should be taken
not to fold, squeeze or block the hoses.
3.8 Using detergent /softener
and bleach nector
When using detergent, softener, starch, fabric dye,
bleachor limescale remover read the manufacturer's
instruction the package carefully and follow
the suggested dosagevalues. Use measuring cup
if available.
1 2
3
Type1
1
2
Type2
1
2
Type3
Washing Machine /User's Manual
Type1:
1.for laundry detergent
2.for softener
3.for bleach
Type2:
1.for laundry detergent
2.for bleach
Type3:
1.putting laundry
detergent into drum
directly
2.for bleach

3.9 Put rat guard into the machine

If you want to put rat guard into the machine ,
you should take the screw out ,then assemble rat
guard into the machine ,the last step is putting the
screw to fix the rat guard .
( a )
( b )
( c )
13 / EN