Table of Contents
Advertisement
M@ Selecting a music source for recording
Press
the INPUT/REC OUT switching key
Turn the SOURCE selector knob to select
1 | to select REC OUT mode.
the source from which you want to record.
Start the cassette tape deck to
Start the music
source
from
begin recording.
which
you want to record.
¢ If the REC OUT indicator is off, press the INPUT/
REC OUT switching key to turn it on.
¢ The SOURCE indicator for the music source you
have selected will light orange for approximately
five seconds before turning red (returning to INPUT
mode).
¢ Note that you may also record simultaneously
on two cassette tape decks.
* When the power for the selected recording device
is off, or when you are not recording, be sure to
keep the REC OUT mode set to OFF. (REC OUT
made is set to OFF when all the source indicator
lights are off.)
© The REC OUT indicator lights up.
e¢ The next step must be performed within five
seconds, or the amplifier will return to INPUT
mode.
Monitoring recording
Connecting
a 3-head cassette tape deck to the
Begin playing from the selected recording
Kenwood L-Ai lets you compare the pre-recording
source.
and post-recording
sound
from
the tape while
recording is still in progress.
Listening to a Second music source |
while recording
Vv Main unit
v Remote Control
Turn the SOURCE | Use the INPUT SOURCE
selector knob to | selector keys to select
select the music | the music source from
source from which | which you wanttolisten.
you want to listen.
pees
To monitor recording while it is in progress, follow
'geen,
ge 6 gue,
6g, §«=s-s the. procedure below.
Start recording from the source you have
selected.
° Begin recording by following the procedure de-
scribed above in "Selecting a music source for
described above in "Selecting
a music source for
Confirm the amplifier is in INPUT mode.
¢ The REC OUT indicator is off.
Start playing from the source you have
selected.
Vv Main unit
Turn the SOURCE
selector
knob
to
select TAPE 1 (or if
the deck is connec-
ted to TAPE 2, then
select TAPE 2).
'Vv Remote Control
Use
the
INPUT
SOURCE
selector
keys to select either
TAPE 1 or TAPE 2.
15
Advertisement
Table of Contents
