Table of Contents
Advertisement
20.
Listening--- Listening to music at high volume levels
and for extended durations can damage one's hearing.
In order to reduce the risk of damage to hearing, one
should lower the volume to a safe, comfortable level,
and reduce the amount of time listening at high levels.
Symbol
For the terminals marked with symbol of"
1
"
may be of
sufficient magnitude to constitute a risk of electric shock.
The external wiring connected to the terminals requires
installation by an instructed person or the used of
ready-made leads or cords.
If the product has the symbol
[Q]
in its rating label and
the power cord has two pins, it means that the equipment
is a Class II or double insulated electrical appliance. It
has been designed in such a way that it does not require
a safety connection to electrical earth.
The following information are recommended to be
included where applicable:
...,. Refers to alternating current(AC).
Refers to direct current(DC).
1§1
Refers to Class II equipment.
(!>
Refers to stand-by.
I
Refers to power ON.
7
Refers to dangerous voltage.
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of non-insulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
To reduce the risk of electric shock. Do not remove
cover (or back). No user serviceable parts inside.
Refer to qualified service personnel.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance instructions in the literature
accompanying the appliance.
6
Precautions for Using Remote Control
Use the remote control by pointing it towards the
remote sensor. The items between the remote
control and the remote sensor will interfere the
normal operation.
Do not make remote control vibrate violently. Also,
do not splash liquid on the remote control, also do
not put the remote control in high humidity place.
Do not place remote control under direct sunlight
which will cause deformation of the unit by heat.
When the remote sensor is under direct sunlight or
strong lighting, the remote control will do not work.
If so please change the lighting or TV's position, or
operate the remote control closer to the remote
sensor.
Installing/Removing Remote's Batteries
Place two AAA size batteries in the remote control's battery
compartment, making sure to match the polarity markings
inside the compartment.
Note: The picture
is
only for reference .
.A. (
Caution )
• Incorrect installation may cause battery leakage and
corrosion, resulting in damage to the remote control.
• Do not mix old and new batteries.
• Replace only with same or equivalent type. Do not mix
different battery types (such as alkaline and manganese
batteries).
• Do not use rechargeable (Ni-Cd) batteries.
• Do not burn or break up batteries.
• Do not expose batteries to excessive heat such as
sunshine, fire or the like.
• Make sure you dispose of batteries correctly.
• Ensure batteries are replaced correctly, there is danger
of explosion and fire if battery is reversed.
• Do not disassemble or modify the remote control.
Advertisement
Table of Contents
