LG LX53 Series Owner's Manual page 24

Adapter connection
(Depending on model & country)
CAUTION
• Please be sure to connect the TV to the AC-DC power adapter
before connecting the TV's power plug to a wall power outlet.
Network connection
Wired network connection
This TV can be connected to a Pro:Centric server via the LAN port. After
making the physical connection, the TV needs to be set up for network
communication.
Connect the LAN port of the Modem or Router from Pro:Centric server
to the LAN port on the TV.
(Depending on model)
LAN
Broadband Modem
Broadband Service
CAUTION
• Do not connect a modular phone cable to the LAN port.
• Since there are various connection methods, please follow the
specifications of your telecommunication carrier or internet service
provider.
Router
Broadband Modem
Broadband Service
HDMI connection
HDMI ULTRA HD deep colour settings
(Only UX34**)
• SETTINGS PICTURE
HDMI (1/2) ULTRA HD Deep Colour
- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
- Off : Support 4K @ 50/60 Hz (4:2:0)
• All HDMI ports support the HDCP 2.2.
• 4K Source is only supported in HDMI input.
• 4K signal and content are not available in the RF/USB input.
• All HDMI input ports support 4K @ 50/60 Hz (For details on
the supported specifications, refer to the table below.) for
highdefinition video. Picture or sound may not be supported
depending on the specifications of the external device connected.
In that case, change the settings for HDMI ULTRA HD Deep
Colour.
4K @ 50/60 Hz Support Format
Resolution Frame rate (Hz)
50.00
3840 x 2160p
59.94
4096 x 2160p
60.00
1 : Only supported when HDMI ULTRA HD Deep Colour turned "On".
Audio connection
Speaker Output Setup
Connect the external speaker to the SPEAKER OUT jack on the TV.
Method of Volume control port
* Cable Spec.
GND / UP / Down
NOTE
• Use only with the 3 Pole 3.5mm Stereo Jack.
HDMI ULTRA HD Deep Colour
Colour Depth /
Chroma Sampling
8 bit 10 bit 12 bit
YCbCr 4:2:0 YCbCr 4:2:0
YCbCr 4:2:2
1
YCbCr 4:4:4 -
1
RGB 4:4:4 -
1
Each Up/ Down pin is pulled to 3.3V
with CPU GPIO.
CPU detects transition from 3.3V
to GND level for volume control.
1
-
-
13