13.3 Removing tableware
WARNING
Risk of injury!
Hot tableware can cause burns to the
skin. When hot, tableware is sensitive
to shock, may crack and can result in
injury.
▶
When the programme has ended,
do not empty the appliance until
the tableware has cooled down for
a while.
To prevent water dripping on the
1.
tableware, unload it starting at the
bottom and working up.
Check the washing tank and ac-
2.
cessories for soiling and clean if
necessary.
→ "Cleaning and servicing",
Page 37
14 Basic operation
Ba s i c ope r a t i o n
Ba s i c ope r a t i o n
14.1 Switching on the appli-
ance
▶
Press
.
The Eco 50° programme is set by
default.
The Eco 50° programme is espe-
cially environmentally friendly and
ideal for normally soiled tableware.
It is the most efficient programme
for the combination of energy/wa-
ter consumption for this type of
tableware and evidences conform-
ity with the EU Ecodesign Direct-
ive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
1
Depending on the appliance specifications
14.2 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
Press the programme button re-
▶
peatedly until the right programme
has been selected.
a The programme is set and the LED
flashes.
14.3 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
▶
Press the button for the relevant
additional function.
→ "Additional functions", Page 19
a The additional function is set and
the additional function button
flashes.
14.4 Setting timer
programming
You can delay the start of the pro-
gramme by 3, 6 or 9 hours.
Press
repeatedly until the relev-
1.
ant display lights up.
To activate timer programming,
2.
press
.
Note: To deactivate timer program-
ming, press
repeatedly until none
of the displays 3h, 6h or 9h light up.
14.5 Starting the programme
▶
Press
.
Basic operation en
1
31