Checking The Engine-Oil Level; Checking And Adjusting The Skids - Toro 38720 Operator's Manual

Checking the Engine-Oil
Level
Service Interval: Before each use or daily
Figure 16
Checking and Adjusting the
Skids
Service Interval: Yearly
Check the skids to ensure that the auger does not
contact the paved surface. Adjust the skids as needed
to compensate for wear
1. Loosen the skid bolts.
g210346
2. Slide a 5 mm (3/16 inch) board underneath the
scraper.
Note:
Using a thinner board will result in a more
aggressive scraper. A thicker board will result in
a less aggressive scraper.
3. Lower the skids to the ground.
Note:
Ensure that the skids are flat on the
ground.
4. Tighten the skid bolts.
g214777
12
(Figure 17).