Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Lumberjack ECM550
- Page 1 OPERATING MANUAL Electric Cement Mixer ORIGINAL INSTRUCTIONS ECM550...
-
Page 2: Safety Warnings & Instructions
SAFETY WARNINGS & INSTRUCTIONS SYMBOL AFFIXED TO THE MACHINE UNDERSTAND YOUR MIXER Read and understand the owner’s manual and labels that are fixed to the mixer. Learn its application and limitations as well as the specific potential hazards peculiar to it. Become familiar with the controls before operating this mixer. - Page 3 SAFETY WARNINGS & INSTRUCTIONS SYMBOLS l DRESS PROPERLY Do not wear loose clothing, gloves or jewelry (rings, wrist watches). They can be caught in moving parts. Protective non- conductive gloves and non-skid footwear are recommended when working. Wear protective hair covering to contain long hair, preventing it from getting caught in machinery.
- Page 4 SAFETY WARNINGS & INSTRUCTIONS SYMBOLS IPX4 means: water splashed against the enclosure from any direction shall have no harmful effects. l KEEP VISITORS AND CHILDREN AWAY Keep unauthorised persons away from the mixer. Do not allow children to handle or climb on or in the mixer. l DO NOT OVERREACH Keep proper footing and balance at all times when loading or unloading the mixer.
-
Page 5: Table Of Contents
TABLE OF CONTENTS Safety Warnings & Instructions ………………...…………………………………………….…..3 Electrical Connection ……………………………………………………………………………………...6 Specifications……………………………………………………………………………......6 Contents of Shipping Container …………………………………………………………………..7 Assembly Instructions ………………...…………………………………………………………... 7 Operation Instructions …………………………………………….……………………………... ..9 Maintenance Instructions ………………………………………………………………………....10 Wiring Diagram ………………..…………………………………………………………………...10 Parts Schematic ………………………………………………………………………………....11 If using an extension cable, plug it directly into ELECTRICAL CONNECTION the RCD. -
Page 6: Contents Of Shipping Container
CONTENTS OF THE MIXER ASSEMBLY INSTRUCTIONS Two people assist in assembly recommended. - Page 7 Insert the cross headed screws from the Position the drum onto the plastic bottom outside through the holes in the drum. plate as shown. Hold it in place and secure it with a M12x30 bolt with lock washer and Place a lock washer inside between the flat washer.
-
Page 8: Operation Instructions
OPERATION INSTRUCTIONS LOADING / MIXING Insert the support legs into the bracket and EMPTYING secure them together with a shaft and hairpin. Step.2 Step.1 LOADING Completely unwind the extension cord. Connect it to the cement mixer first before plugging into the power supply. -
Page 9: Maintenance Instructions
NOTE: A built-in thermal protecter is Do not pour or spray water directly arranged in the motor to prevent it over the motor cover, especially the from overheating. The thermal openings in it. protecter restores automatically Wipe off any external material on when the motor cools down. -
Page 10: Parts Schematic
INFORMATION Highest of the a-weighted emission A-weighted Rated Rated sound pressure level (db)/position sound capacity of speed of Motor (start/ loading/operation wheel) power level mixer (l) drum /min ECM550 86 /loading MIXER DIAGRAM... - Page 11 PARTS LIST Description Q'ty Description Q'ty Drum Drive Pinion Shaft Nut M 10 Bearing 6202-2RS Spring Washer 10 Cotter Pin 5x40 Washer 10 Flat Washer Leather Washer 10 Wheel Screw M10x25 Frame Elastic Latch 3 Mixing Blade Nut M6 Leg Connection Bracket Spring Washer 6 Support Leg Washer 6...
Need help?
Do you have a question about the ECM550 and is the answer not in the manual?
Questions and answers