Crate ThunderBass BX-4115 Owner's Manual page 9

BX-440H / BX-4115
BX-440H / BX-4115
Using the Biamp Capabilities – BX-
Example 3:
With the BX-4115 for the low end; a
BX-210HP powered cabinet for the
high end:
Plug your bass into the BX-4115, then:
(1) Run a shielded cable from the biamp
low out jack of the BX-4115 to its power
amp in jack. (Connection to the BX-
4115's speaker is already made through
the factory-installed speaker out cable.)
(2) Run a shielded cable from the biamp
high out jack of the BX-4115 to the input
jack of the BXE-210HP.
Adjust the Crossover Frequency and
Balance controls for the best sound.
ThunderBass Amplifier
4115
:
(con't)
AC LINE IN POWER
CAUTION – HOT! POWERAMP
OUTPUT
220 WATTS @
4 MIN.LOAD
AC
OUTLET
100/120VAC: 250V
from
bass
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC
ELECTRIQUE. NE PAS OUVRIR.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION:
CHASSIS SURFACE HOT.
1200W MAX / 120V / 60Hz ATTENTION: SURFACIE DE CHASSIS CHAUDE.
MODEL BX-440H
SERIAL #
AC LINE IN
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
BXE-210HP
1400 FERGUSON AVENUE • ST. LOUIS, MO 63133
500 WATTS MAX. • 60 Hz • 120 VAC
MODEL BXE-210HP
SERIAL # A
MADE IN THE U.S.A. BY SLM ELECTRONICS
1400 FERGUSON AVENUE • ST. LOUIS, MO 63133
4 6
2
2 8
0 10
VOLUME INPUT
RISK OF ELECTRIC SHOCK DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
WARNING: TO REDUCE THE RISK OF FIRE OF OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION – HOT!
CAUTION – HOT!
BX-4115
1
TO
BX-4115
500 WATTS MAX. • 60 Hz • 120 VAC
BXE-210HP
MODEL BXE-210HP
SERIAL #
A
MADE IN THE U.S.A. BY SLM ELECTRONICS
4
6
2 8
0 10
2
VOLUME INPUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
WARNING:
TO REDUCE THE RISK OF FIRE OF OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
BX-4115
1
9