Samsung WA50A5400A Series User Manual page 61

Code
8C
dn
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG).
Untitled-10 61 Untitled-10 61
Check the MEMS sensor.
• Power the washer off. Wait 2-3 minutes, power the washer on, and
then try again.
• If the problem continues, call for service.
Firmware update is in progress through SmartThings.
• To use the product, wait about 30 minutes until the firmware
update completes. (The time required to complete the firmware
update may vary depending on your Internet connection.)
• This code will remain on the display, regardless of power on and
off, until the firmware update is complete.
Meaning
English 61
2023-06-22 2023-06-22 5:32:13 5:32:13