Table of Contents
Advertisement
PLAYBACK OF PRE-RECORDED
CASSETTE
Symptom
Check Point & Correction
"PLAY" button cannot be engaged.
*
Set "POWER"
switch to "VCR" position.
No picture appears on television screen when "PLAY" | *
Set the television to the camera/recorder channel (3
button is pressed.
or 4) depending upon the selected channel on the RF
(TV is connected to the camera/recorder by using RF
channel select switch of RF converter unit.
converter unit.)
Interference on playback picture.
When
you see the playback
picture on your TV,
adjust fine tuning knob on television set to obtain
best picture.
Picture bends at the top of TV screen.
TV receiver is of older type.
1t needs to be modified
to work properly with camera/recorder.
* Tape is damaged.
Try another cassette.
Color of your TV screen
is too bright, too faint or | * TV set has VIR circuit.
Turn it off during playback.
|
change.
DEW LIGHT
Symptom
Check Point & Correction
"DEW (POWER)" light flashes.
* Condensation on the camera/recorder mechanism
— wait until the unit has reached normal room tem-
perature, and condensation has dried.
"DEW (POWER)" light will then stop flashing.
BATTERY CONDITION
£37
Advertisement
Table of Contents
