Initializing Disk; Using Iriver Firmware Updater; Upgrading Firmware - IRiver X20 Manual

O
[ss
a>
D
s
3
=a
[e]
=
3
o
=
[e]
=)
C
=
=]
©
3.
<
D
s
je
C
n
wo
Jayepdn asemu JOA BUISN
iriver | Chapter5 Other Information
Using iriver plus 3
|Initializing Disk |
1. After connecting the product to the USB jack of your
PC using the USB cable, run iriver plus 3.
2. Select [Tools > Portable Device > Initialize Disk] and
click [Start] when the message to confirm initialization
appears.
3. The initialization process is completed and the product
is disconnected from your PC.
m You need to backup the necessary files before initialization
as formatted files cannot be recovered.
Using iriver firmware updater
{Upgrading Firmware |
1. Install iriver firmware updater included in the provided CD-Rom.
2. After connecting the product to the USB jack of your PC
using the USB cable, run iriver firmware updater.
The PC should be connected to internet.
. After the upgrade window is closed, disconnect the USB
cable to complete the firmware upgrade process.
m Do not disconnect the product from PC while downloading
firmware upgrade file.
After the download is completed, disconnect the cable to
activate the firmware upgrade.
a If the already installed firmware is the latest version,
the message to confirm latest version appears.
m When connect the product to your PC, if there is latest firmware,
the instruction message appears automatically.