Amiga 1000 Assembly And Repair Instructions page 37

Hide thumbs Also See for 1000:
Table of Contents

Advertisement

VERSION C-l.l CUSTOM
DEMO
DISKETTE
OPERATION PROCEDURES
The
Version C-l.l Custom Demo Diskette
has proved
to
be
a
very
effective
tool
to
isolate Custom
IC
failures on
the
Amiga
1000 System.
The listed
instructions
will provide
a
step by step guide to using this diskette.
***
USE THE
TROUBLESHOOTING PROCEDURES CONTAINED
IN
THE AMIGA
1000
***
***
ASSEMBLY LEVEL REPAIR SECTION OF THE AMIGA SERVICE MANUAL
TO
***
***
ENSURE THAT THE PCB
IS
THE FAILED ASSEMBLY.
***
***
***
***
PLEASE REFER TO SECTION
3
FOR EXPLANATIONS OF COMMONLY USED TERMS
***
Step
1
Before applying power
to
the
system, connect
an
External Drive, 256K
Ram
Expander
and
Mouse Controller.
Step
2
After System power
up the
Kickstart Prompt will
be
displayed.
At this Prompt, insert
the
Version
1.1
Kickstart Diskette
into the
Internal Drive.
NOTE:
If
the
Kickstart Prompt
is
not
displayed refer
to
Section
2
Step
3
When Kickstart
is
loaded
the
Workbench Prompt will
be
displayed.
At this Prompt, remove the
Kickstart Diskette from
the
Internal Drive
and insert the
Custom Demo Diskette.
NOTE:
If the
Workbench Prompt
is
not
displayed
or the
Kickstart
Prompt displays again, refer
to
Section
2.
Step
4
When
the
Workbench Screen
is
displayed. Activate
the
Custom
Demo ICON
NOTE:
If
the ICON
cannot
be
Activated
or the
Workbench Screen does
not
display correctly, refer
to
Section
2.
Step
5
When
the
Custom Demo ICON Window
is
displayed, Activate
the H.A.M.
Demo ICON.
The H.A.M. Demo will
display
all 4096 Colors that
the
System
is
capable
of producing.
NOTE: If the Demo
displays correctly, close
the
window
by
selecting
the
Gadget
in
the
upper left hand corner.
NOTE: If the
H.A.M. Demo does
not
display
or
displays incorrectly,
refer
to
Section
2.
Step
6
Activate
the
Molly Demo
ICON.
The Molly Demo displays colored balls
which should move smoothly and continuously.
NOTE: If the Demo
displays correctly, close
the
window
by pulling
down
the
screen until
the
Molly Window
is
visible, select
the
Gadget
in
the upper left hand corner then pull
the
Workbench
Screen back up
to
the top of the display.
NOTE:
If
the
Molly Demo does
not display
or
displays incorrectly,
refer
to
Section
2.

Advertisement

Table of Contents
loading

Related Products for Amiga 1000

Table of Contents