Advertisement
Quick Links
Advertisement
Summary of Contents for Gesswein Power Hand 2X Z-STX
- Page 1 Instruction Manual ® Standard Head Assembly Model: Z-STX #510-2200...
- Page 2 Introduction The Gesswein Power Hand 2X Z-STX Head Assembly is engineered and man- ufactured to a high degree of precision and will give you many years of trou- ble-free service. Backed by a limited warranty that covers wear parts for 90 days and overall balance of parts for six months.
-
Page 3: Included Accessories
Accessories Included Accessories A. One ⁄ " (2.35mm) Collet (reorder #501-0100) B. One ⁄ " (3.2mm) Collet (reorder #501-0105) C. One Collet Wrench (reorder #510-0180) Optional Accessories A. Handpiece Extension Cord (#510-1120): adds 6 feet, or almost 2 meters, to the 1.7-meter rotary handpiece cord B. -
Page 4: General Description Of Use
General Description of Use Tool Changing The Gesswein Power Hand 2X Rotary Handpiece uses a quick-tool-release mechanism that allows for rapid tool changes. To operate, turn the Collet Release Ring toward the arrow pointing to the “R” or release position (see fig. 2). When in full... - Page 5 If the collet cannot be loosened by hand using the Collet Wrench, additional torque may be required. To use the Collet Wrench, place the tri- Blank Bar angular cutout in the wrench over the collet (see Collet fig. 3), and turn counterclockwise to loosen and Wrench clockwise to tighten the collet.
- Page 6 Z-STX Parts List When ordering spare parts, always specify part# (or item# if applicable) and description. Part# Item# Description Z-STX-101 8960050 Top Cover 8960051 Z-STX-102 Teflon Spacer 8960052 Z-STX-103 Rubber O-Ring Z-STX-104 8960053 Dust Ring 8960054 Z-STX-105 Wave Washer Z-STX-106 8960055 Clip Ring 8960056...
- Page 8 • A selection of 8 heads • Two reciprocating profilers • One side-to-side profiler • Belt Sander 201 Hancock Ave. Bridgeport, CT 06605, USA orders 800.243.4466 | 203.366.5400 | fax 203.366.3953 email info@gesswein.com | www.gesswein.com #890-2056/1015...