Advertisement
Time display mode selector
Remote control signal output
SWITCHED ac outlet
UNSWITCHED
ac outlet
@ CLEAR key
Depress this key to cancel the timer setting.
UP/DOWN
® counter key
.
Depress this key to use the timer as a time counter.
@ STARTI/STOP key
Depress this key to start the count. Depress again to stop counting.
Press again to resume the count.
@ TIMER LIST key
Depress this key to display the timer program. The setting nearest
after the present time will be displayed.
@ —(List down) key, +(List up) key
After the TIMER LIST key has been depressed and a timer program
displayed, depress the [+] key to display the next timer program or
the [-] key to display the previous timer program. When either of
these keys are pressed again, the next (or previous) timer program
on the list will be displayed. If either key is kept depressed, the list
will be displayed in sequence.
@ Number keys
Use these keys to set the clock and the timer programs.
@ SEND key
Depress this key to start the clock operating after the correct time
and day has been set, and to memorize the timer programs.
@ Time display mode selector
Set this selector
to the desired
mode
of time display:
12-hour
system or 24-hour system.
@ Remote control signal output
The output for connecting the RM-S5 system remote controller.
@ SWITCHED ac outlet
This outlet provides ac power and is controlled by the MANUAL
ON/OFF switch or the timer.
@ UNSWITCHED ac outlet
This outlet
supplies
ac power
which
is not controlled
by the
MANUAL ON/OFF switch or the timer. It can be used as an ac outlet
when the power cord of the timer is connected to a wall outlet.
Advertisement
