Table of Contents
Advertisement
■
DVB-S
1. Select
Antenna System
2. Select
One LNB
press
OK
to set.
One
LNB:
Compatible with single LNB.
MiniDiSEqC:
Up to 2 LNBs can be controlled.
DiSEqC
1.0:
Up to 4 LNBs can be controlled.
Single
Cable:
When using the Single Cable router, up to 8 user bands are available.
You can receive several satellites if you have DiSEqC control antenna
●
system.
This TV supports DiSEqC Version 1.0.
●
3. Select
LNB Configuration
Select
Dual Tuner Mode
●
tuner function.
4. Select
LNB
/
Satellite
Select
IN 1
/
IN 2
●
1) Set
LNB
first.
– If you set to
– If you set to
AB.
– If you set to
2) Set
Satellite
for the selected LNB.
– Select
No Satellite
(Available satellite will be searched in
– Select
User defined
– If you set to
Band,
User Band Frequency
Cable router you use). For details, read the manual of the Single
Cable router.
Watching > Tuning and editing channels > Selectable satellites
5. Press
BACK/RETURN
6. Select
Auto Setup
with
/
and press
/
MiniDiSEqC
/
DiSEqC 1.0
with
/
with
/
with
/
and set with
in
Signal Input
with
One
LNB,
LNB
is not selectable.
MiniDiSEqC
or
Single
DiSEqC
1.0, select from LNB AA, AB, BA and BB.
if you do not know the connected satellite.
to set
Test Transponder Frequency
Single
Cable, additional settings are required. Set
and
to store.
with
/
and press
- 90 -
OK
to access.
/
Single Cable
and press
OK
to access.
, set to
On
with
/
.
/
to set for each tuner.
Cable, select from LNB AA and
Auto
Setup.)
PIN
(depending on the Single
OK
to access.
with
/
and
/
to use dual
manually.
User
Advertisement
Table of Contents
