waatr Puremax 4d Manual

User Manual
Charging
To charge, place the magnetic charger
on top of the cap over the charging pins
and connect the USB plug to a wall
adapter. Full charge takes about 3-4
hours.
Battery Life
Press the activation button
once to check the battery life.
Normal Mode Treatment
Press activation button twice to activate
Normal Mode. This mode will activate
UV-C LEDs for 1 min. to treat your water.
During this process, the indicator light
will breathe BLUE. Once treatment is
completed, the indicator light will flash
GREEN.
Self-Cleaning Feature
To conserve battery, PureMax ships with the self-cleaning feature deactivated. To activate the self-cleaning
feature, LONG PRESS the activation button for 3 seconds; the indicator light will blink
activation. To deactivate this feature, LONG PRESS the activation button for
3 seconds; the indicator light will blink
ON, PureMax will automatically activate once every hour for 15 seconds to keep the bottle odor-free. While
self-cleaning is in-progress, indicator light will breathe BLUE.
Hydration Reminder
To conserve battery, PureMax 4D ships from
with the drink reminder feature deactivated. To
activate the drink reminder feature, press the
activation button 5 times; the indicator light
will blink ORANGE upon successful activation.
To deactivate this feature, press the activation
button 5 times; the indicator light will blink
RED upon successful deactivation. Once the
drink reminder is turned ON, PureMax will slow
blink GREEN 3 times every 30 minutes for up
to 2 hours. If the user does not remove the cap
for more than 2 hours, the drink reminder will
go into standby mode until the user removes
the cap.
Breathing ORANGE
light while charging
GREEN
light indicates
40% - 100%
charge
Press 2X for
Normal Mode
RED upon successful deactivation. Once self-cleaning mode is turned
Flashing
Hydration Reminders:
OFF
UV-C Smart Safety Sensor
To protect users from accidental eye exposure, PureMax 4D is built with a
smart safety sensor. This sensor deactivates the UV-C LED once the cap
is removed from the bottle. If the user removes the cap from the bottle during
Normal Mode or Pro Mode or self-cleaning mode is in progress, the indicator
LED will blink RED for 3 seconds and then the UV-C LED will turn off. This
prevents user from accidental exposure to the UV-C light.
Manual
Customer Service: hello@waatr.com • 1-619-567-6174
Solid GREEN
light when fully charged
ORANGE
light indicates
11% - 39%
charge
Pro Mode Treatment
Press activation button thrice to activate Pro
Mode. This mode will activate UV-C
LEDs for 3 min. During this process, the
indicator light will breathe BLUE. Once
treatment is completed, the indicator light will
flash GREEN.
GREEN upon successful
RED: Flashing
Hydration Reminders:
ON
RED
GREEN
Self-cleaning
Self-cleaning
OFF
ON
ORANGE:
Flashing
Smart Safety Sensor
ACTIVATED
Scan for
instructional
videos
RED
light indicates
1% - 10%
charge
Press 3X for
Pro Mode
BLUE
Self-cleaning
IN PROGRESS
Flashing GREEN:
Hydration Reminders:
IN PROGRESS
RED