Table of Contents
Advertisement
Quick Links
P U R E C L A S S I C
Thank you for buying the Pure Classic Transducer
System for your guitar! The Pure Classic is a four-head
piezo-ceramic transducer with endpin jack.
Please read through the complete instructions before
beginning installation. This manual is written in great
detail to help you install the Pure Classic for best
possible performance. Please also familiarize yourself
with the handling instructions of the double-sided tape
and with the disclaimer at the end of this manual.
TABLE OF CONTENTS
1.
Tools Needed
2.
3.
4.
5.
Installation for Guitars without Bridge
6.
Installation for Guitars with Bridge
7.
8.
9.
1. TOOLS & SUPPLIES NEEDED
•
Superglue gel
•
Electric drill (for drilling endpin jack hole and
pickup reference hole)
•
Proper drill bits for endpin jack mount and a
very small bit for the reference holes
•
Pliers or wrench for endpin jack installation
•
4 latex gloves (if superglue is used,
alternatively use the supplied finger cots)
•
Razorblade
92798 Cape Arago Hwy, Coos Bay, OR 97420 | 541-888-3517 | Toll Free 1-800-867-6863 | kksound.com
Advertisement
Table of Contents
Related Manuals for K&K Sound PURE CLASSIC
Summary of Contents for K&K Sound PURE CLASSIC
- Page 1 P U R E C L A S S I C Thank you for buying the Pure Classic Transducer System for your guitar! The Pure Classic is a four-head piezo-ceramic transducer with endpin jack. Please read through the complete instructions before beginning installation.
- Page 2 2. PACKAGE CONTENTS • Pure Classic 4-head transducer with cable harness and endpin jack • Double-sided tape for removable installation 3. REMOVABLE VS. PERMANENT INSTALLATION The pickups can be installed either with a permanent installation (super-gluing them directly to the wood inside your guitar) or with a removable installation (using the supplied double-sided adhesive tape).
- Page 3 If using super glue : Find out which hand you are going to use for the installation and put on a latex glove or one of the included finger cots. Use some of the supplied double-sided adhesive tape and stick a small piece to the tip of your index or middle finger (whichever you use, see photo) and stick the pickup to it.
- Page 4 • Use the protruding drill bit (string piece or nail) as a side-stop for your outer pickups (see photo). In other words, glue the pickup with its outer edge close to touching the nail that extends inside the guitar through the according reference hole. •...
- Page 5 • Mark an according point on your guitar. • To get the cleanest possible result, start with a small (1/8”) drill bit and work your way up to a ½” hole in 5 or 6 individual drill steps using a little bit bigger drill every time. Alternatively a step drill works fine.
- Page 6 Please call us if you have any questions. If you have doubts please do not install this product. Regarding the installation or removal of the Pure Classic and any product which contains any of these transducers: Installation or removal of the above listed products is at your own risk. In no event will K&K Sound Systems Inc.
Need help?
Do you have a question about the PURE CLASSIC and is the answer not in the manual?
Questions and answers