Advertisement
2
ASSEMBLE FRONT WHEELS
Insert the front wheel peg into the
plastic base until you hear a click.
Press down the button on the plastic
baseand pull the wheel set out.
3
HOW TO ADJUST THE CANOPY
Pull forward or press back ward the canopy wire to open or close the canopy.
4
www.PyleUSA.com
ATTACH THE BUMPER BAR
Slide the ends of the bumper bar over
the mouldings on the side of your
stroller. Keep sliding it down until the
latch clicks into place on both sides.
Push rmly upwards to ensure that it is
attached securely.
3a
4
HOW TO USE THE RESTRAINT SYSTEM
To unlock buckle press on on the centre button and pull harness out from each
side. To buckle, push each side of harness back into buckle until each side clicks in
place.
5
HOW TO ADJUST THE BACKREST
Press the adjuster and push seat
forward to raise seat upright.
To lower backrest, pull the button ring
downwards and slide the adjuster until
the seat is in the desired postion.
To raise the backrest push and slide
the adjuster upwards whilst holding
the belt.
4a
6
BRAKE SYSTEM
Step the brake pedal to stop the stroller.
To release the brakes, lift the brake
pedal.
www.PyleUSA.com
5
Advertisement
