Advertisement
The Input/Output Plate:
(1) Impedance Selector Switch:
Use this switch to select 16 ohm
mono operation or 8 ohm stereo/4
ohm mono operation.
(2) Out 1/4" Jack: When using the
cabinet in the mono operating
mode, use this jack to connect the
cabinet to another speaker enclo-
sure of the same impedance.
(3) In/Left 1/4" Jack: When using
the cabinet in the mono operating
mode, use this jack as the cabinet's
input jack. Connect the output of
your amplifier to this jack by means
of the 14 gauge speaker cable pro-
vided.
When using the cabinet in the
stereo operating mode, connect this
jack to the left channel output of
your amplifier.
(4) Right 1/4" Jack: When using
the cabinet in the stereo operating
mode, connect this jack to the right
channel output of your amplifier.
When using the cabinet in the mono
operating mode, this jack is not
used.
Refer to the illustrations to the
right for additional information.
BV412RVB/SVB
4 Ohm Mono Configuration:
16 OHM
16 OHMS
MONO
16 Ohm Mono Configuration:
16 OHM
16 OHMS
MONO
8 Ohm Stereo Configuration:
16 OHMS
MONO
Guitar Enclosure
3
2
1
OUT
4 OHM
OUT
IN
4 OHMS
MONO
8 OHMS
LEFT
STEREO
OUT
4 OHM
OUT
IN
4 OHMS
MONO
8 OHMS
LEFT
STEREO
LEFT OUT
RIGHT OUT
OUT
IN
4 OHMS
MONO
8 OHMS
LEFT
STEREO
4
Mono Amplifier
BV412RVB/SVB
Input plate
RIGHT
Mono Amplifier
BV412RVB/SVB
Input plate
RIGHT
Stereo Amplifier
BV215RVD
Input plate
RIGHT
Advertisement
