Height Adjustment - Craftsman C935.51850 Operator's Manual

through t heholes inthehandle a nd
thread ontheplastic k nob asshown in
figure 5.
ATTACHING EXTENSION CORD
• An extension cord retainer (figure 7) is
built into the switch handle that
prevents the cord from coming
unplugged. To use this feature, simply
double the extension cord about 8
inches (203mm) from the end, and
insert it into the slot in the bottom of
the handle area. Hook the loop formed
by doubling the cord over the tab.
Gently tug on the cord to insure that it
is firmly retained in the trimmer's
handle. Plug the receptacle end of the
extension cord into the plug blades in
the trimmer.
O
For maximum comfort and control,
adjust the auxiliary handle to suit your
height. Shorter users adjust handle to a
lower position (away from you) and
taller users, adjust handle to an upper
position (towards you). The handle
should be adjusted so that your front
arm is straight when the trimmer is in
the working position.
H EIG HT ADJ USTM ENT
• The overall height of the trimmer can
be adjusted by pressing the conversion
button shown in figure 6 and moving
the metal tube up or down into one of
the three rectangular recesses in the
tube until you hear it "snap" into place.
_, CAUTION: Confirm that the tube is
locked in place by releasing the button
and pushing down on the tube.