Advertisement
(G) Descaling
To maintain optimum performance, the system
needs to be decalcified after every 15 litres of water
consumption (about 8 complete refills). The LED (3)
is flashing.
• First, switch off and unplug the appliance.
• Empty the water tank (E).
• Remove the iron from the iron rest (if applicable
unlock the iron). Wait until the appliance has
cooled down (minimum 2.5 hours).
• Remove the transparent cover (10) and unscrew
the cleaning valve (12).
• Empty the boiler.
• Pour in 500 ml tap water only. Do not use any
chemicals, additives or calc remover.
• Screw the cleaning valve (12) to close the boiler.
• Shake the base unit to rinse, then empty the
boiler.
• Repeat this procedure one more time.
• After having finished the descaling procedure,
plug in, switch on (1) and press the reset button
(4) for 5 seconds until the LED (3) turns off.
If the appliance is switched off without descaling the LED
(3) will start to flash again when it is next switched on.
(H) Cleaning and maintenance
• Before cleaning, always make sure that the
appliance is switched off, unplugged and has
cooled down completely.
• Wipe the soleplate clean with a damp or dry cloth.
Never use scouring pads, vinegar or other
chemicals.
• To clean the soft material on the handle use a
damp cloth.
6
Advertisement
