Outsunny 84E-009 Assembly & Instruction Manual page 2

EN
Respectful user:
Welcome to use our honey extractor（honey separator） product, thank you for
your trust in our products, we are deeply honored.In order to facilitate your use, we
have specially configured the user manual for you.Before using it for the first time,
please read and follow the operating instructions and safety information.Believe it
will be helpful for you to use this product effectively.
The information contained in this document is subject to change without notice!
1. Scope of application：
This manual is suitable for the installation and operation of manual honey extractor
with 2 frames/3 frames/4 frames.
This honey extractor is suitable for the use of separating honey from standard bee
frames and langstroth bee frames, except for custom honey extractors.
2. Main components:
3.Assembly Instructions：
Remove the two screws under the main body of honey extractor bracket, and then
install the lower bracket on the extractor.There are 3 screw holes in the lower
section of the honey extractor bracket, choose 1 or 2 holes to install the screws，
the height of the bottom of honey extractor from the ground is 40 cm.Choose 2 or 3
holes to install the screws，the height of the bottom of honey extractor from the
ground is 30 cm.
1