Initial Setup - Panasonic TH-55JX800Z Operating Instructions Manual

TH-55_65JX800Z_Eng_TQB4GA0022.book 21 ページ ２０２１年２月２６日 金曜日 午前１０時５４分

Initial Setup

When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
≥ These steps are not necessary if the setup has been
completed by your local dealer.
≥ Please complete connections (p. 13 - 15) and settings
(if necessary) of the connected equipment before
starting Initial Setup. For information about the
settings for the connected equipment, read the
manual of the equipment.
1
Plug the TV into a live mains socket
and turn the power on
≥Takes a few seconds to be displayed.
2
Select the following items
Set up each item by following the on-screen instructions.
Example:
Select TV mode
"Home" mode is optimized for efficient energy usage for home use.
"Shop" mode is optimized to store demo with fixed settings.
∫ How to use the remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select the language
Register (pair) the Bluetooth
≥ Press and hold the volume down button and the
Google Assistant (voice control) button simultaneously
for 3 seconds.
Home
Shop
® remote control
Set up your Wi-Fi network and Google account
≥ If you are using an Android phone for setup, select
[Continue]. You can then easily transfer your Android
phone's Wi-Fi network and Google account to your
TV.
If you are not using an Android phone for setup, select
≥
[Skip], then complete settings on the setup screen
which appears next.
When using an Ethernet cable to connect to the
≥
internet, select [Skip], then select [Use Ethernet] on
the Wi-Fi network settings screen.
Enter the PIN number for parental controls
Select your tuner mode
When [Satellite] has been selected, follow the
≥
on-screen instructions to set the satellite type, region,
and other details.
Select [Scan]
Select [Home]
Select [Home] for use in a home viewing environment.
[Shop] is for shop display.
≥
To change the viewing environment later on, the set
≥
will need to have all settings initialised by accessing
[Reset].
Initial Setup is now complete and the
TV is ready for viewing.
If tuning has failed check the Satellite cable, RF cable,
and the network connection, and then follow the
on-screen instructions.
Note
The TV goes into Standby mode when no signal is
≥
received and no operation is performed for 10 minutes
if [No Signal Power Off] in the Power menu is set to
[10 Minutes] (factory setting).
≥ To retune all channels
[Channel Scan] (Settings > Channel > Channels)
If no satellite channel is found, set [LNB Frequency] to
≥
suit your environment.
[Channel Scan] (Settings > Channel > Channels)
≥ To switch the TV signal mode later
[Channel Installation Mode] (Settings > Channel)
To initialise all settings
≥
[Reset] (Settings > Device Preferences > About)
21
English