Summary of Contents for Tesla MS360
- Page 1 USER MANUAL CZ | SK | PL | EN TESLA MS360 SMART WEATHER STATION WITH 3-DAY WEATHER FORECAST www.tesla-electronics.eu...
- Page 2 It will be a good guide when getting to know your new device. We hope that the TESLA weather station will be a pleasant companion for you. The data and advice used in this guide may be subject to future changes and improvements and is valid as of the release of its current version, in March 2023.
-
Page 3: Package Contents
You can configure and control the product through the app and you can check the data about the weather on both the indoor base unit and the app, the historical indoor/outdoor temperature records can only be checked in the Smart Live app. CHARGING CABLE LACE INSTRUCTIONS FOR USE www.tesla-electronics.eu www.tesla-electronics.eu... -
Page 4: Base Unit Specifications
2. BASE UNIT SPECIFICATIONS 4. QUICK GUIDE 4.1. FRONT VIEW Model MS360 Material ABS + PC Size 160x23x160 mm Exit USB-A 5V-1A RISING TIME WEATHER ICON AND THE SUNSET Color Black Power supply Micro USB-A 5V-2A Weather forecast: sunny, cloudy,... -
Page 5: Rear View
USB OUT Led indicator SYNCHRONIZATION/ RESTARTING SENSOR FRONT VIEW SIDE VIEW BUTTON WIFI POWER INPUT SETTINGS Lanyard slot POWER INPUT STAND Micro USB charging input REAR VIEW INSIDE VIEW VIEW FROM ABOVE DISPLAY BRIGHTNESS CONTROL SWITCHING OFF THE ALARM www.tesla-electronics.eu www.tesla-electronics.eu... -
Page 6: Installation And Placement
TIME DISPLAY UNLOCK THE BATTERY COVER BY ROTATING INSERT MICRO USB SECURE THE BATTERY AGAINST CLOCKWISE POWER CABLE COVER TURNING IN THE DIRECTION CLOCK HANDS Note: the red indicator means „Charging“, when fully charged, the red indicator will disappear. www.tesla-electronics.eu www.tesla-electronics.eu... - Page 7 Reset: Long press the “SYNC/PAIR” button on the base unit to clear all channels and sensor data and the unit will beep three times. CONNECTION SUCCESSFUL The WiFi icon will remain lit LONG PRESS SYNC/PAIR BUTTON LONG PRESS SYNCHRONIZATION IT WAS SUCCESSFUL www.tesla-electronics.eu www.tesla-electronics.eu...
- Page 8 Wi-Fi connection mode. If the symbol remains lit, long press the „WiFi“ button until it starts flashing. This will take you to Wi-Fi connection mode ( Chybí CZ Chybí CZ screen screen THE WIFI ICON IS FLASHING LONG PRESS WIFI BUTTON www.tesla-electronics.eu www.tesla-electronics.eu...
- Page 9 Click the the mobile phone is connected be displayed. „Done“ button to complete to), then enter the WiFi pass- the setup. word and click „Next“. Chybí CZ Chybí CZ Chybí CZ screen screen screen www.tesla-electronics.eu www.tesla-electronics.eu...
- Page 10 (weather condition; highest/ lowest temperature; Chybí CZ SET ALARM CLOCK day of the week) screen BASE UNIT DATA (temperature; humidity; HISTORICAL DATA temperature setting) DISCHARGE WARNING BATTERY SENSOR DATA (when sensor battery (temperature; humidity; is below 10%) alarm settings) www.tesla-electronics.eu www.tesla-electronics.eu...
-
Page 11: Alarm Clock
Switching off the alarm clock is possible either with the button on the top or with one of the buttons 1) Setting the alarm clock is only possible using the application. on the back You can set a specific time and repeat options. www.tesla-electronics.eu www.tesla-electronics.eu... -
Page 12: Warranty Conditions
(or a system made up of several components) compared to the standard design. TESLA Electronics LTD, as the manufacturer of this device, declares that the MS360 device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available on the website 4) FAILED TO SYNCHRONIZE THE BASE UNIT WITH THE SENSOR? https://www.tesla-electronics.eu/...
Need help?
Do you have a question about the MS360 and is the answer not in the manual?
Questions and answers