Table of Contents
Advertisement
Hardware Installation - Receiver
Set up the Duplicast Wireless A/V Receiver
1.
Connect one end of the included HDMI Cable into an
available HDMI input on your HDTV or HD Projector.
2.
Connect the other end of the HDMI cable to the HDMI
port on the Duplicast Wireless A/V Receiver.
3.
Plug the Micro USB end of the Power Cable into the
USB-Micro B power port on the Duplicast Wireless
A/V Receiver.
4.
Plug the other end of the USB Power Cable into the
USB Power Adapter included in the package.
5.
Plug the USB Power Adapter into an available power
outlet. The Power LED will light solid blue.
6.
Turn on your TV or projector, and make sure you
select the correct video source. The IOGEAR
Duplicast flash screen will come up on the display
and SSID, Pin Code and IP Address will populate
the bottom of the screen. A slogan will appear which
reads "Ready for connection".
Micro USB
HDTV
7
Mode
Advertisement
Table of Contents
