Related Manuals for BE Power Equipment FSB75 COMBO
Summary of Contents for BE Power Equipment FSB75 COMBO
- Page 1 AIR COMPRESSOR PEDESTAL FAN & WALL FAN FSB75 COMBO OPERATORS MANUAL OWNER’S MANUAL FSB75 COMBO Model: FSB75 COMBO Version 5.1 SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
-
Page 2: Safety Instructions
FSB75 COMBO OWNER’S MANUAL POWER EQUIPMENT POWER EQUIPMENT SAFETY INSTRUCTIONS This product is intended for indoor use only. Always operate the product from a power source of the same voltage, frequency and rating as indicated on the product identification plate. -
Page 3: Fan Dimensions
FSB75 COMBO OWNER’S MANUAL POWER EQUIPMENT POWER EQUIPMENT FAN DIMENSIONS Pedestal Wall PAGE 3 Page 2... - Page 4 FSB75 COMBO OWNER’S MANUAL POWER EQUIPMENT POWER EQUIPMENT PEDESTAL FAN ASSEMBLY 1. Fit REAR GUARD of fan onto the MOTOR and secure with 4 screws provided. Ensure screws are tight to avoid vibration noise 2. Fit BLADE to shaft and lock blade SET SCREW.
- Page 5 FSB75 COMBO OWNER’S MANUAL POWER EQUIPMENT POWER EQUIPMENT WALL FAN ASSEMBLY 1. Complete points 1-3 on page 4. 2. Attach the wall mount base to the wall by drilling two holes with a M 10*80 drill bit. Secure with the two M12 screws provided.
-
Page 6: Environment Of Use
FSB75 COMBO OWNER’S MANUAL POWER EQUIPMENT POWER EQUIPMENT 4. Insert the motor into the female support and secure with the screw. FAN HEAD FEMALE SUPPORTER LOCATING SCREW 5. Secure locking screw on FEMALE SUPPORTER for desired head angle/ tilt. To adjust the head tilt, loosen the nut above the female support, then re-secure the nut after adjustment. -
Page 7: Operation
FSB75 COMBO OWNER’S MANUAL POWER EQUIPMENT POWER EQUIPMENT OPERATION 1. Make sure the Fans voltage is in accordance with local voltage before use. 2. The fan is recommended for use in ordinary indoor situations, but not at high humidity. 3. To turn on select the desired speed setting... -
Page 8: Maintenance
FSB75 COMBO OWNER’S MANUAL POWER EQUIPMENT POWER EQUIPMENT MAINTENANCE 1. To ensure prolonged safe use ensure you have this unit inpected, cleaned & moving parts lubricated by a qualified person aher every 1000 hours of use. FSB-75 2. Regularly inspect the cord & plug & do not use if damaged. A lisenced FSB-75 electrician is required to repair or replace the cord &... - Page 9 FSB75 COMBO OWNER’S MANUAL POWER EQUIPMENT POWER EQUIPMENT EXPLOSION VIEW & PARTS BREAKDOWN PAGE 9 Page 8...
- Page 10 FSB75 COMBO OWNER’S MANUAL POWER EQUIPMENT POWER EQUIPMENT EXPLOSION VIEW & PARTS BREAKDOWN PAGE 10 Page 9...
-
Page 11: Warranty
FSB75 COMBO OWNER’S MANUAL POWER EQUIPMENT POWER EQUIPMENT WARRANTY We warrant that this product will be free from defects in materials or workmanship for a period of 12 months from the date of purchase. The benefits conferred by this warranty are in addition to all rights and remedies which you may be entitled to under the Australian Consumer Law, and any Other statutory rights you may have under other applicable laws. -
Page 12: Contact Details
Distributed in Australia by CONTACT DETAILS B.A.R Group P/L 15 Hudson Place, Mulgrave, NSW, Australia 2756 Phone: 02 4577 2144 www.bargroup.com.au Distributed in New Zealand by AIR COMPRESSOR OPERATORS MANUAL CONTACT DETAILS BE Pressure Supply 541D Te Rapa Road, Te Rapa, Hamilton 3200, New Zealand Phone: 07 849 0000 www.bepressure.co.nz...
Need help?
Do you have a question about the FSB75 COMBO and is the answer not in the manual?
Questions and answers